DSS-M15S 270° 15KG DF Metal Servo with Analog Feedback

DSS-M15S servos have been well received by customers in these years. It has extremely wide angle range control, huge load capacity and excellent quality. This DSS-M15S with analog feedback has broken its internal potentiometer signal. This is an analog signal with 0~3.3V feedback. You can connect it to MCU to realize close-loop feedback control.
DSS-M15S 270° Metal servo with feedback is compatible with Arduino Servo library. You can drive it with Arduino Board and read the angle value from analog side.

Electronic specifications

Operating voltage: 4.8-7.2V

6V test environment

Operating speed (no load): 0.18 sec/60 degrees

Resting current: 80mA

Locking torque: 11.5KG*cm

Stall current: 1.4A

Standby current: 4mA

7V test environment

Operating speed (no load): 0.16sec/60 degrees

Resting current: 100mA

Locking torque: 12KG*cm

Stall current: 1.76A

Standby current: 5mA

Mechanical specifications

Gear material: metal gear

Operating angle: 270 degrees

Wiring gauge: 28PVC

Data line length: 320mm

Gear bracket spline: 25T/5.80

Gear ratio: 310:1

Size: 54.5*20*47.5mm

Control specifications

Feedback signal: 0-3.3V

Control signal: RC PWM

Pulse range: 500-2500 us

Median signal value: 1500us

Clockwise rotation: <1500us

Control frequency: 50-330Hz (Arduion compatible)

Product wiki

DSS-M15S 270° servo with analog feedback x1

Crossed horn x1

Long straight horn x1

Short straight horn x1

M2*8 self-tapping screws and gasket x5

M3*6 screw x1