By fullauto2009
#21136
Hi,

I am trying to enable my Win 10 PC to be able to find a Bluno Beetle.

The BLE link should allow me to discover the beetle.

Where is the driver for the BLE Link?

Thanks
By mustafa.o.k
#30008
I'm also having the same issue. Just bought a USB BLE and my Windows 7 PC reports "hardware id missing windows cannot identify the device plugged into ..." when I insert it into the USB port.

Does anyone know where to find the driver, or of this error message indicates the device has a fault?
By nana.wang
#30013
Hi, thanks for your support and sorry for inconvenience caused.
Please kindly note that the product is alright.
We are checking on it and will feed you back as soon as possible.
By nana.wang
#30029
According to the inquires, we have made an application to accomplish the mutual communication between Bluno and Blynk.
1. Control onboard indicator LED by Blynk.
Step1:
Download allocation file in Arduino of Blynk
http://help.blynk.cc/en/articles/512105 ... or-arduino
Image

Then download the Blynk_Release_v0.6.1.zip directly.
Image

Then unzip the file we can find 2 files: libraries and tools.
Image

Copy 4 files into libraries of Arduino.
Image

Same as, copy 3 files in the tools to the tools of Arduino.
https://github.com/NanaWangDFR/DFPlayer ... Blynk5.png

Here we accomplished allocation of blynk in Arduino.
Step2: (Step2 and Step3 should be carried out at the same time)
Open Arduino and select example code:
Examples >> Blynk >> Boards_Bluetooth >> DFRobot_Bluno_BLE_Link
Image

The example key is from Copy all in smartphone APP(It can only be obtained by establishing a new project in phone).
Image

Write the key to the example and select UNO board (this test uses the board bluno), select the port number and edit.
Image
Step3:
Operate the APP
1. Create a New Project. Fulfil the program as Blynk, select Arduino UNO and BLE then click Create.
2. Choose Device Button and BLE.
3. Set Button Digital >> D13
4. Open Bluetooth in phone.
5. Set Bluetooth as Connect BLE device >> bluno >> OK and wait for successful connection.
6. Run the program, when we repeat click D13, L led will flash in bluno board.
Image

2. Bluno can send sensor data to Blynk, and Blynk can show data by character or painting via controls.
Step1:
Based on the 1 task, we just need to add the other device Value Display and set the Analog >> A0
Image




Step2:
Add an analog degree sensor to bluno
Image
Step3:
Programming the program, active blynk in app, rotate the analog degree sensor and we can check the value in respond (range from 0~1023)