By jeff
#33795
I have purchased a Bluno V2.0 and an Accessory Shield V1.0

I believe I installed blunoAccessory.zip correctly into my Arduino IDE.

When I compile get lots of errors starting like:
Code: Select all
sketch\BlunoAccessory.cpp:32:3: error: stray '\302' in program

   <title>Bluno_Accessory/BlunoAccessory.cpp at master · DFRobot/Bluno_Accessory · GitHub</title>

   ^

sketch\BlunoAccessory.cpp:32:3: error: stray '\267' in program

sketch\BlunoAccessory.cpp:32:3: error: stray '\302' in program

sketch\BlunoAccessory.cpp:32:3: error: stray '\267' in program

sketch\PlainProtocol.cpp:32:3: error: stray '\302' in program

   <title>PlainProtocol/PlainProtocol.cpp at master · DFRobot/PlainProtocol · GitHub</title>
By nana.wang
#33863
Hi, Sorry for late reply, it costs some time to check it out.
There is a problem with code compilation, the error prompt sits with illegal characters, and there is a line number prompt.
Please check the line number of the error prompt and check illegal characters.
It is possible that the program code is copied and pasted into the IDE, and the character is not the standard English, so it did not pass the compilation.
So that you can open the arduino IDE setting and select
Show verbose output during: (√) compilation (√) upload
Compiler warning: (√) Display line numbers.