HuskyLens is an easy-to-use AI machine vision sensor. It is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, color recognition, and tag(QR code) recognition.
I finally decided to use my Huskylens, it has been sitting on a shelf since it arriced as part of the Kickstarted, the plan was to connect it to a PICO.

I followed the instructions and attempted to update the firmware.
The output i sshown below:
Code: Select all
:~/HUSKYLENSUploader-master $ sudo python3 HUSKYLENSWithModelV0.5.1Norm.kfpkg 
[INFO] COM Port Auto Detected, Selected  /dev/ttyUSB0 
[INFO] Default baudrate is 115200 , later it may be changed to the value you set. 
[INFO] Trying to Enter the ISP Mode... 

[INFO] Greeting Message Detected, Start Downloading ISP 
Downloading ISP: |██████████████████████████████████████████████████| 100.0% Complete
[INFO] Booting From 0x80000000 
[INFO] Wait For 0.3 second for ISP to Boot 
[INFO] Boot to Flashmode Successfully 
[INFO] Selected Flash:  On-Board 
[INFO] Extracting KFPKG ...  
[INFO] Writing HuskyLens.bin into 0x00000000 
Downloading: |████████████████████████████████████████----------| 80.5% Complete
I left it for over an hour stuck at 80.5%

Then disconnected and re-connected it to my computer, now there is no image displayed.

Is there anyway to recover the situation or is it irrecoverable?

Steve Gale
By vivek.genuvenue1220
Questioning is critical How to skill in your life and work. This module will explore how to employ questioning as a powerful tool for effective communication, problem-solving, decision-making, and innovation.