Page 1 of 1

Huskylens protocol

Unread postPosted:Mon Mar 30, 2020 9:44 am
by shane
I have just received my Huskylens and want to play with it from my PC with python I can develop and test fast before moving to micro controller that is slower to develop.

I have connected it via the provided cable to a usb to serial converter(CP2102) then to my PC. I have set the Huskylens to serial 115200 mode. When I power and train it to recognize something I was expecting the Husky lens to output the data of the recognize object something like the second half of this video https://www.youtube.com/watch?v=ult15B2gBNM but nothing comes out of the uart of the huskylens.

Can someone please tell me what the UART protcol is that Huskylens uses

Re: Huskylens protocol

Unread postPosted:Tue Mar 31, 2020 5:37 am
by nana.wang
Hi Shane,
thank you for your support and contact.
We are checking it and will feed you back ASAP.

Re: Huskylens protocol

Unread postPosted:Tue Mar 31, 2020 12:05 pm
by yuyouliang2012
Hello,

Please check the link of the wiki below:
https://wiki.dfrobot.com/HUSKYLENS_V1.0 ... 05_SEN0336

You can find the protocol document in the HuskyLens github.
https://github.com/HuskyLens/HUSKYLENSA ... rotocol.md