Page 1 of 1

Technology limitation or not enough learning?

Unread postPosted:Thu Jan 07, 2021 5:03 am
by tanzyb4
I am trying to track an object rolling down a slope. Sometimes it can sometimes it cant track. Is this a technology limitation as the object is rolling down too fast or is it not enough learning by the algorithm? I have the "learn enable" function turned on.

Re: Technology limitation or not enough learning?

Unread postPosted:Fri Jan 08, 2021 8:06 am
by 347945801
It may be that the object is moving too fast. Unfortunately, the camera used by HuskyLens is not a particularly expensive and precise camera, and it may not be able to capture high-speed moving objects.

Re: Technology limitation or not enough learning?

Unread postPosted:Wed Jan 27, 2021 5:48 pm
by jeffroig1
It could also be that as the object moves away or towards the HuskyLens that the lighting conditions change and the color that once was deemed trackable to no longer visible. Use a flashlight or some other light source to even out the light conditions and see if that helps.