Easy IoT is a simplest IoT Solution presented by DFRobot
#44113
Hello,

Please found an exemple:
Code: Select all
#include <Wire.h>
#include <DFRobot_SIM7000.h>

SoftwareSerial     mySerial(10, 7); // with link between D8 - D10 on my Mega.
DFRobot_SIM7000    sim7000;


void setup() 
{   
    Serial.begin(115200);     
    sim7000.begin(mySerial);
    
    sim7000.turnOFF();
    Serial.print("Turn OFF SIM7000 ");
    for(int i=0 ; i < 6; i++)
    {
      delay(1000);
      Serial.print(".");
    }
    Serial.println(" OK");

    Serial.print("Turn ON SIM7000 ...");
    if( sim7000.turnON() )
      Serial.println(" OK");
    else
      Serial.println(" Failed !");
      
    delay(2000);
    
    Serial.print("Set baud rate: 19200 ...");
    if( sim7000.setBaudRate(19200) )
      Serial.println(" OK");
    else
      Serial.println(" Failed !");
        
    delay(2000);     
}

void loop()
{
  Serial.print(".");
  delay(1000);
}