#7564
:?: If you find nothing about your question, please add reviews about yours. Thanks!

Equipment:
P50811-114812.jpg

1. Veyron driver broken?
Wiring:
P50811-115715.jpg


Operation:
Just thrust the KEY to switch to Set mode, wait a seconds, two motors will run. Then prove the Veyron driver is ok.
:arrow: Video On YouTube

2. Veyron Serial communication not work?

Wiring:
P50811-141624.jpg


Operation:
0. Download the library first and install the library, the sample sketch is in the library.
(13.65 KiB) Downloaded 400 times

:!: Note: It's different from the one from the wiki page.(Serial instead of Serial1; set higher speed at 200rpm)

2 Upload sketch “B_CheckSerial”.
:!: Note: when you are going to upload anything, please unplug the wire on the PIN 0,1.
Open the Serial monitor, choose "57600". You will see:
(8.46 KiB) Downloaded 1993 times

:!: If you do not see it, reverse the tx&rx sequence and check again.

3 Upload sketch “C_RunMotor”.
Then you will see your two motors running according to the sketch.
:arrow: Video On YouTube