Page 1 of 1

MIND+ v1.56 Event detection problem

Unread postPosted:Fri Jul 12, 2019 8:39 am
by tguneysu
In the new version, in ONLINE mode, the event HAT blocks do not detect button presses, shakes, etc.

They all worked correctly in the v1.53.

I have reported other button press issues earlier. But I think they all originate from the same problem, that events blocks are not activated.

Very urgent, as it makes the micro:bit unusable.

thx.

Re: MIND+ v1.56 Event detection problem

Unread postPosted:Thu Jul 25, 2019 7:08 am
by tguneysu
Two weeks and no reply !!!!

Re: MIND+ v1.56 Event detection problem

Unread postPosted:Sat Jul 27, 2019 8:43 am
by 1938391275
Hi, really sorry for the late reply.

First of all, thank you for your support about our Product. Here is the solution for your problem:
If now you are in English Interface, switch to Chinese, switch to English, close and reopen the software, then all the blocks should work fine; If you not in English Interface currently, switch to English, close and reopen Mind+.

Hope this helps! If you still have any questions, please let us know, we will try our best to make it right!

Re: MIND+ v1.56 Event detection problem

Unread postPosted:Thu Aug 01, 2019 6:26 am
by tguneysu
OK. That has temporarily solved the problem!
However, since MIND+ is SCRATCH3 based and there is such problem in S3, you guys have injected a problem into the language switching portion of the code. Would it not be better for you to fix the problem than make the user go through language selection acrobatics to make your code initialize properly ?

Re: MIND+ v1.56 Event detection problem

Unread postPosted:Fri Aug 02, 2019 1:41 am
by 1938391275
Thanks for your suggestion, we will fix the problem in the next version1.5.7 soon.

Frances

Re: MIND+ v1.56 Event detection problem

Unread postPosted:Wed Oct 23, 2019 12:48 pm
by jonesann1098
tguneysu wrote:
Fri Jul 12, 2019 8:39 am
In the new version, in ONLINE mode, the event HAT blocks do not detect button presses, shakes, etc.

They all worked correctly in the v1.53. - it was th time when I was studying with the help of

I have reported other button press issues earlier. But I think they all originate from the same problem, that events blocks are not activated.

Very urgent, as it makes the micro:bit unusable.

thx.
Sure, the v1.53 was good and acceptable at that time.

Re: MIND+ v1.56 Event detection problem

Unread postPosted:Sat Dec 21, 2019 9:43 am
by missangeltabassum
Its sounds good. It means a new version , in ONLINE mode is going to launch soon.