Page 2 of 2

Re: missing MaQueen Plus in Mind+ Kit choices

Unread postPosted:Sun Jun 28, 2020 7:02 am
by nana.wang
Hi, sorry for late reply, we just back to work from the traditional dragon boat festival.
I am checking it and will feed you back ASAP.

Re: missing MaQueen Plus in Mind+ Kit choices

Unread postPosted:Sun Jun 28, 2020 7:41 am
by nana.wang
Hi, I checked it with the development group, the function to control encoder sensors by PRM and distance can be realized by burning the latest firmware to Maqueen+.
The firmware is already developed but not released yet, we are preparing the tutorial to help users updating by themselves, it may be released in one week.
And once the firmware released, mind+ group will develop the relating blocks accordingly, but it is a little time-consuming, and you can try developing user-defined blocks in the User-Ext in mind+, here is the tutorial: https://mindplus.dfrobot.com.cn/ext-api

Re: missing MaQueen Plus in Mind+ Kit choices

Unread postPosted:Mon Aug 17, 2020 8:32 am
by matulac.melvin
MaQueen PLUS is missing again in Mind+

What happened?
Offline: Microbit board offers only 2 shields micro:IO-Box and motor:bit

Re: missing MaQueen Plus in Mind+ Kit choices

Unread postPosted:Mon Aug 17, 2020 10:15 am
by nana.wang
Hi, thank you for your feedback.
We are checking it and will feed you back ASAP.

Re: missing MaQueen Plus in Mind+ Kit choices

Unread postPosted:Mon Aug 17, 2020 10:29 am
by nana.wang
Hi, I just downloaded Mind+ Desktop for Windows
version: V1.6.4 RC2.0 in http://mindplus.cc/download-en.html
And its alright, the image is for your reference.

Re: missing MaQueen Plus in Mind+ Kit choices

Unread postPosted:Tue Aug 18, 2020 1:39 am
by matulac.melvin
Yes, we have the same version. Just downloaded. Uninstalled old and installed new one but I get this instead (see attachment).. A puzzle for me. Hope you could help.

Re: missing MaQueen Plus in Mind+ Kit choices

Unread postPosted:Tue Aug 18, 2020 3:50 am
by matulac.melvin
I got it right... Just switched a few times to different boards... and it was ok. Thanks

Re: missing MaQueen Plus in Mind+ Kit choices

Unread postPosted:Tue Aug 25, 2020 2:50 am
by nana.wang
Hi Matulac,
I have also checked this problem with Mind+ group.
From their side I know that in Offline mode, there are 2 modes: one for arduino CC, one for micropython. If you choose micropython, then due to it is still in the development, we can only find what you found before, Microbit board offers only 2 shields micro:IO-Box and motor:bit.

Re: missing MaQueen Plus in Mind+ Kit choices

Unread postPosted:Mon Nov 16, 2020 3:45 pm
by montiak
What PINs are used for sensors of encoders?