[347945801]

You can set the pin to high/low to turn the module on/off with code.
But you need to set the pin to high for a period of time (maybe 2-3 seconds), so that you can open the module normally

[melodygeorge178]

Thanks for the information.Keep sharinglike this

[johnsteve6689]

SIM7600 Software power on is the main title as all of you can see but the stuff here is not easy for all of us to know what they are talking about. In this case i guess one has to do some research as well. I can hope that Omnipapers site will be of some guidance for me and them as we all are up for that for them.

[donaldmontgo82]

AT commands are compatible with SIM7500/SIM7600-H series modules. Meanwhile the SIM7600 series integrates main industrial standard interfaces, with powerful expansibility, including abundant interfaces such as UART, USB, I2C, GPIO, which is suitable for main IoT applications such as telematics, surveillance devices, CPE, industrial routers, and remote diagnostics etc!