[jbeard]

I just got a V3 bluetooth bee.  After reading through other topics on this forum I was able to get the baud rate set to 115200 and communication between 2 pcs works great over the bluetooth device.

Now I want to use the bluetooth bee to communicate between a pc and a Motorola HC12 microcontroller (TTL serial).  Wired serial communication between pc and the mcu works great as well as mcu to mcu.

However with the bluetooth module I am only able to transmit serial data from the mcu to the pc.  The mcu does not recognize any data that is received from the bluetooth module.  Any ideas?

Thanks,
Jamie

[jbeard]

Update...

It should have occurred to me that the output of the bluetooth bee was 3.3V level.  I routed the serial output through an rf isolator (5V supply) and my communicating with the motorola mcu was fixed.  Works nice now.  Hopefully that will help someone else.

[ricky]

:D Good to hear that.