Digital magnetic sensor SKU: DFR0033

From DFRobot Electronic Product Wiki and Tutorial: Arduino and Robot Wiki-DFRobot.com
Digital magnetic sensor SKU: DFR0033

Introduction

what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right.This magnetic sensor knows whether there is a magnetic object nearby or not. And it correctly tells you through ditigal output.See below picture for a quick demo!

Specification

  • Supply Voltage: 3.3V to 5V
  • Indicator LED on board
  • Interface: Digital
  • Size:22x30mm


Connection Diagram

Digital magnetic sensor Diagram



Sample Code

int ledPin = 13;                // choose the pin for the LED
int inputPin = 2;               // choose the input pin  
int val = 0;                    // variable for reading the pin status
void setup() {
  pinMode(ledPin, OUTPUT);      // declare LED as output
  pinMode(inputPin, INPUT);     // declare pushbutton as input
}
void loop(){
  val = digitalRead(inputPin);  // read input value
  if (val == HIGH) {            // check if the input is HIGH
    digitalWrite(ledPin, LOW);  // turn LED OFF
  } else {
    digitalWrite(ledPin, HIGH); // turn LED ON
  }
}



Nextredirectltr.pngGo Shopping Digital magnetic sensor SKU: DFR0033