CommunityForumWikiBlogLearn
TOP
Overview of Replacement N20 Metal Motor Kit for Maqueen Plus V3 STEM Robot
Overview of Replacement N20 Metal Motor Kit for Maqueen Plus V3 STEM Robot
Back of Replacement N20 Metal Motor Kit for Maqueen Plus V3 STEM Robot
Detail of Replacement N20 Metal Motor Kit for Maqueen Plus V3 STEM Robot
Shipping List of Replacement N20 Metal Motor Kit for Maqueen Plus V3 STEM Robot

Replacement N20 Metal Motor Kit for Maqueen Plus V3 STEM Robot

$7.00
SKU: DFR1225
This accessory kit offers an N20 motor and mounting hardware for quick repair of a robot. It ensures compatibility, requires no soldering, and includes an encoder.
Purchase this product and earn 70 reward points, which are tied to VIP membership program. Learn More >
    IntroductionFeaturesSpecificationDocumentsShipping List

    Introduction

    The Maqueen Plus V3 is a powerful robot, but accidents can happen in the classroom or during intense project sessions. Contaminants like dust, hair, or particles can jam the gears, or rough handling might damage a motor.

    But a broken motor doesn't mean the end of your robot! This official N20 motor accessory kit is designed for a quick and simple repair, allowing you to restore your Maqueen Plus V3 to full functionality in minutes.


    Please Note: This is a replacement part for the Maqueen Plus V3 (compatible with models MBT0050-AA and MBT0050-18650).

    The new Maqueen Plus V3 educational robot comes complete with the two motors required for operation. You do not need to purchase this kit when buying a new Maqueen Plus V3.

    Each kit contains one motor and the necessary mounting hardware. If both motors on your robot are damaged, you will need to purchase two kits.

    Features

  • All-in-One Solution: Includes one motor, a mounting bracket, screws, and a connecting wire—everything needed for a single motor replacement.
  • Quick & Easy Repair: The motor connects via a PH2.0 connector for plug-and-play installation. No soldering is required. Simply swap the old motor out and plug the new one in.
  • Official Accessory: Guarantees perfect compatibility and performance, matching the original motor specifications of the Maqueen Plus V3.
  • Integrated Encoder: The motor comes with a pre-installed Hall magnetic ring and PCB, enabling precise closed-loop control over speed and position.

    • Specification

  • Interface: 2P PH2.0
  • Screw: M2×8 Cross-Recessed Combination Screw

    • Motor Details:

  • Model: N20 (with rear output shaft)
  • Rated Voltage: 6V DC
  • Motor Speed: 20000 RPM (at Rated Voltage)
  • Gear Reduction Ratio: 1:75 (Mechanical Reduction)
  • Output Shaft Speed: 266 RPM (at Rated Voltage)
  • Rotation Direction: CCW (Counterclockwise, Viewed from Output Shaft End)


    • Component Materials:

  • Motor Mount: ABS (Acrylonitrile Butadiene Styrene)
  • Connecting Wire: 2P PH2.0 Dual-Ended Cable

    • Documents

    Shipping List

  • N20 Metal Motor (with pre-installed Hall magnetic ring and PCB) ×1
  • Motor Mounting Bracket ×1
  • Mounting Screws ×2
  • Motor Connecting Wire ×1
    • RoboticsRobotics ProjectsRobotics ForumRobotics Tutorials
    Replacement N20 Metal Motor Kit for Maqueen Plus V3 STEM Robot
    $0.00