8 Channel Ethernet Relay Controller (Support PoE and USB) Introduction With Ethernet relay, IoT(Internet of things) has become so easy. RLY-8-POE-USB is a POE & USB controlled 8 channel relay controller based on STM32. With this module users are able to do remote control/ switching power supply centralized management, the purpose of this product can be directly by net POE power supply switch power supply is connected to the Internet, so you..
8 Channel IoT Ethernet Relay Controller (Support PoE and RS485) Introduction
The RLY-8 is a network relay controller with open source communication protocol. It integrates 8 channel relays and each relay is able to stand 277VAC-10A or 125VAC-12A power. Since most of the household appliances are under 250VAC, this means you can use the RLY-8 relay almost everywhere!
The RLY-8 uses a STM32 microcontroller. It supports 2 types of power supply: Wall adapter o..
Arduino TIAN Introduction The Arduino TIAN is based on the Atheros AR9342 connected to an Atmel Cortex M0+ 32-bit microcontroller plus all connectivity: Ethernet, Wi-Fi, Bluetooth.
The new Arduino Tian board is powered by Atmel’s SAMD21 MCU, featuring a 32-bit ARM Cortex? M0+ core and a Qualcomm Atheros AR9342, which is an highly integrated MIPS processor operating at up to 533MHz and feature-rich IEEE802.1..
Arduino UNO WIFI Introduction
The Arduino UNO WiFi board is based on the ATmega328 and it has an integrated arduino ESP8266 WiFi Module. If you are starting out with Arduino, or starting with IoT, this is the board to get.
The Arduino Uno Wi-Fi is the new Arduino Uno with an integrated Wi-Fi module! The board is based on the ATmega328P with an ESP8266 Wi-Fi Module integrated. It has 14 digital input/output pi..
Out Of Stock
Arduino Yún- A New Arduino Microcontroller Board Introduction
The Arduino Yún is a newcomer microcontroller board in the Arduino boards family. It is a microcontroller board based on the ATmega32u4 (datasheet) and the Atheros AR9331. The Atheros processor supports a Linux distribution based on OpenWRT named Linino. The board has built-in Ethernet and WiFi support, a USB-A port, micro-SD card slot, 20 digital input/output pin..
ESP8266 Wifi Bee (Arduino Compatible) Introduction Wifi Bee-ESP8266 is a Serial-to-WIFI module using XBEE design in a compact size, compatible with XBEE slot, applicable to a variety of 3.3V single-chip system. It can be used for Arduino, wireless data transfer, remote control. On-board switch can be used to easily select the Startup module or Upgrade firmware.
ESP8266 arduino module has a powerful on-chip processing and storage capa..
Particle Photon Introduction
The Photon is a $19 tiny Wi-Fi development kit for creating connected projects and products for the Internet of Things. It's easy to use, it's powerful, and it's connected to the cloud.
The tools that make up the Photon's ecosystem (and come along with the board) are designed to let you build and create whether you're an embedded engineer, web developer, Arduino enthusiast or IoT..
PoE Injector - Single Port 30W Introduction This high power PoE injector supports Midspan MODE-B PoE power protocol, and has 30W output.It supports up to 10/100Mbps communicating speed, and 100VAC~240VAC wide range input voltage makes it work stably with different voltage standards.
With PoE output, you will no longer need any external power. This PoE injector meets your every project requirement such as router, wireles AP a..
W5500 Ethernet with POE IOT Board (Arduino Compatible) Introduction W5500 Ethernet with POE Mainboard is a new member in our Ethernet family. It is based on the ATmega32u4 and W5500 Ethernet chip, which is quite useful to most IOT projects.
W5500 chip is a Hardwired TCP/IP embedded Ethernet chip that provides easier Internet connection to embedded systems. It enables users to have the Internet connectivity in their applications just by using..
WiDo - An Arduino Compatible IoT (internet of thing) Board Introduction
Power Supply range: 5v or 7-12v
Arduino Leonardo Compatible
Integrate with WG1300 WIFI chip and support 2.4GHz IEEE 802.11 b/g network
WIFi and MicroSD driven by SPI port
On board 2.4G PCB Antenna
Wifi Bee-RN-XV Module Introduction
The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. In other words, if your project is set up for XBee and you want to move it to a standard WiFi network, you can drop this in the same socket ..
WiFi Shield V3 For Arduino PCB Antenna (802.11b/g/n) Introduction
DFRobot WiFi Shield, is part of our wireless family product. This WIFI Shield V3 supports AP + STA dual mode, and is extremely easy to connect to a home router network. You only need a mobile phone or Pad to log in the AP network of this module (similar way with some router configuration tool). After logging in the module and set the Wireless name, it is ready to connect the WIFI net..
WiFi Shield V3 For Arduino RPSMA (802.11b/g/n) Introduction
DFRobot WiFi Shield for Arduino, is part of our wireless family product. This WIFI Shield V3 supports AP + STA dual mode, and is extremely easy to connect to a home router network. You only need a mobile phone or Pad to log in the AP network of this module (similar way with some router configuration tool). After logging in the module and set the Wireless name, it is ready to connec..
Xboard Relay - An Ethernet Controllered Relay Introduction
Internet of things has become so easy. With Xboard Relay, you can not only monitor data through internet, but also control it through internet. The Xboard Relay combines an Atmega 32u4 microprocessor and wiz5100 chip which is fully compatible with Arduino Lendardo and Ethernet library, it has build-in Xbee socket and 2 Relays which allow an easy sensoring and cont..
Out Of Stock
XBoard V2 -A Bridge Between Home And Internet (Arduino Compatible) Introduction
This is Version 2.0 of the Xboard. The main improvement is that it now operates at 5V, making it compatible with most sensors and I2C protocol without the need of a voltage level converter.
The XBoard is a unique Arduino board which features a WIZnet ethernet port, an XBee socket, and an ATMega328. This board will add wireless XBee control as well as internet con..
RN-XV WiFly Module - SMA Connector Introduction The RN-XV module by Roving Networks is a certified Wi-Fi solution especially designed for customer who want to migrate their existing 802.15.4 architecture to a standard TCP/IP based platform without having to redesign their existing hardware. In other words, if your project is set up for XBee and you want to move it to a standard WiFi network, you can drop this in the same socket wi..