Powering the BLUNO NANO
Account cancelled 2017-02-06 22:51:25 2293 Views1 Replies Hi
this is my first project.
i understand that the Vin for the bluno nano is 7-12V.
how do i use a rechargable 3.7V Polymer Lithium Ion Battery - (400 or 1000 mah)
I have to step up? How do I do that?
Also, i can connect it to a LiPo Charger Basic - Micro-USB, then step up to the bluno nano board right?
I will still be able to charge it?
this is my first project.
i understand that the Vin for the bluno nano is 7-12V.
how do i use a rechargable 3.7V Polymer Lithium Ion Battery - (400 or 1000 mah)
I have to step up? How do I do that?
Also, i can connect it to a LiPo Charger Basic - Micro-USB, then step up to the bluno nano board right?
I will still be able to charge it?
2017-02-09 16:13:42 Hi
You will still be able to charge nano via the LiPo Charger Basic - Micro-USB, no problem. But for the vin interface, if you want to charge nano, maybe you need to use a DC-DC boost converter module, please refer to the following link, just a reference:make_clickable_callback(MAGIC_URL_FULL, ' ', 'https://www.dfrobot.com/index.php?route=product/product&product_id=444', '', ' class="postlink"') Wendy.Hu
You will still be able to charge nano via the LiPo Charger Basic - Micro-USB, no problem. But for the vin interface, if you want to charge nano, maybe you need to use a DC-DC boost converter module, please refer to the following link, just a reference:make_clickable_callback(MAGIC_URL_FULL, ' ', 'https://www.dfrobot.com/index.php?route=product/product&product_id=444', '', ' class="postlink"')
Wendy.Hu 