Gravity: Alcohol Sensor SEN0376
kabron 2021-05-10 22:54:53 2235 Views4 Replies Measuring Range of the sensor declared as 0-5ppm.
That corresponds to 0 - 0.005 promile.
It means that will constantly overscaled at any reasonable
ammount of alcohol.
And indeed it overscaled after 0.33L of beer.
The question is: what is practtical benefit of this device?
That corresponds to 0 - 0.005 promile.
It means that will constantly overscaled at any reasonable
ammount of alcohol.
And indeed it overscaled after 0.33L of beer.
The question is: what is practtical benefit of this device?
2021-06-25 00:57:45 Haha, I have a funny story about this sensor. When I was sixteen, let's just say I wasn't the most behaved child in the world. I got in with the wrong crowd, and I started developing alcohol addiction. One night, after coming home from a party, my parents decided to try out their new Gravity Alcohol Sensor(they got it after many incidents of me coming home drunk and lying about it). That moment changed my life, as I started going to rehab at the Gloucester Addiction Help clinic(which I totally recommend btw). After that, I became a different person, and I'm so happy that my parent got that sensor. alicepetermeierrzs21
alicepetermeierrzs21 2021-05-13 00:37:08 kabron
NO it could not! It has very narrow sensing range, much below any real concentrations
kabron 2021-05-12 23:09:41 This sensor can measure alcohol in a volatile state, which is generally present in the breath of people who drink alcohol, and can be used to detect drunk driving. 347945801
347945801 2021-05-12 20:23:34 cd Raspberry-Pi-Gas-Sensor-MQ
sudo python example.py
The calibration is started automatically during initialization. It is important that the sensor is in good / fresh air as smoke / other gases would falsify the calibration. The process takes a few seconds, but the gas content can already be measured thereafter (see video). Some sensors are quite hot, but this should not be a cause for concern. rafaelmatthews12.6
sudo python example.py
The calibration is started automatically during initialization. It is important that the sensor is in good / fresh air as smoke / other gases would falsify the calibration. The process takes a few seconds, but the gas content can already be measured thereafter (see video). Some sensors are quite hot, but this should not be a cause for concern.
rafaelmatthews12.6 