pin names DFR0129

In the schematics of DFR0129 i see the pins: GND, Vin, SCL, SDA, IRQ, ADDR
On the PCB of DFR0129 i see the pins: GND, Vin, SDA, SCL, IRQ, ADDR
Which is the right order?
On the PCB of DFR0129 i see the pins: GND, Vin, SDA, SCL, IRQ, ADDR
Which is the right order?
2014-03-04 11:58:55 i used the pin-order from the PCB and it works like a charm connected to a PIC16F887.
I see you have updated your site. But if someone with an old version of the PCB wants to look how he/she must connect it the wires are wrong. Maybe showing old and new version on the site?
Puffeltje
I see you have updated your site. But if someone with an old version of the PCB wants to look how he/she must connect it the wires are wrong. Maybe showing old and new version on the site?

2014-02-27 22:59:10 O.K. finished,
please check
[url=https://www.dfrobot.com/wiki/index.php/Capacitive_Touch_Kit_For_Arduino(SKU:DFR0129)]https://www.dfrobot.com/wiki/index.php/Capacitive_Touch_Kit_For_Arduino(SKU:DFR0129)[/url]
Grey.CC
please check
[url=https://www.dfrobot.com/wiki/index.php/Capacitive_Touch_Kit_For_Arduino(SKU:DFR0129)]https://www.dfrobot.com/wiki/index.php/Capacitive_Touch_Kit_For_Arduino(SKU:DFR0129)[/url]

2014-02-27 20:19:55 Hello Puffeltje?
Sorry for the inconvenient, This is new version one.
So the pin number is different with the old one.
Please trust the PCB board, and we will update the wiki page recently.
BTY, the sample code is correct.
Grey.CC
Sorry for the inconvenient, This is new version one.
So the pin number is different with the old one.
Please trust the PCB board, and we will update the wiki page recently.
BTY, the sample code is correct.
