CommunityForumWikiBlogLearn
TOP
Front of Raspberry Pi Pico expansion board with ports and connectors-DFRobot product sku:DFR0848 image.
Overhead shot of Raspberry Pi Pico expansion board with I2C UART SPI ports and sensor connectors
Front of black Raspberry Pi Pico expansion board with DFRobot branding and multiple ports for I2C UART SPI and analog digital IOs
Angled shot of a circuit board with multiple headers and labeled ports, featuring raspberry pi pico gpio expansion board and io expansion shield for microcontroller connectivity.
Front of Raspberry Pi Pico Expansion Board with I2C and SPI ports
Overhead shot of Raspberry Pi Pico expansion board with GPIO ports and connectors.
Front of Raspberry Pi Pico expansion board with I2C and UART ports
Front of Raspberry Pi Pico expansion board with GPIO ports and branding
Angled shot of Raspberry Pi Pico expansion board with GPIO ports and connectors showing I2C UART SPI interfaces

Gravity: Expansion Board for Raspberry Pi Pico / Pico 2

$4.90
SKU: DFR0848
The Gravity Expansion Board is designed for Raspberry Pi Pico and Pico 2, featuring multiple communication ports, plug-and-play functionality, and support for various sensors and modules.
Purchase this product and earn 49 reward points, which are tied to VIP membership program. Learn More >
    IntroductionFeaturesSpecificationShipping List Documents Review

    Introduction

    This Gravity Expansion Board, specifically designed for Raspberry Pi Pico and Raspberry Pi Pico 2, is compatible with a variety of Gravity sensors and modules.

    With all pins led out, you can directly use it without soldering. Additionally, the board offers various communication ports including, 2 x I2C, 2 x UART, 2 x SPI, 3 x analog IOs and 13 x digital IOs as well as a 3.3~5.5V power connector and GDI port, which provides you with an easier way to prototype.

    Gravity Expansion Board for Raspberry Pi Pico

    Gravity Expansion Board for Raspberry Pi Pico

    Gravity Expansion Board for Pico

    All pins brought out, no soldering required

    Additional Communication Ports: Digital IO, Analog IO, I2C, SPI, UART, GDI

    Note: The product not include Raspberry Pi Pico and Pico 2.

    Features

  • No need to weld, plug-and-play
  • Support all kinds of Gravity sensors and modules
  • Comes with 3.3~5.5 V PH2.0 power interface, applicable to mobile projects
  • Onboard GDI port, compatible with DFRobot - GDI series display

    • Specification

  • All pins brought out onto female pin headers
  • Digital IO x 13: GP2, GP3, GP12-22
  • Analog IO x 3: GP26-GP28
  • UART x 2
  • I2C x 2
  • SPI x 2
  • PH2.0 Power Connector: 3.3 V - 5.5 V
  • Display Screen Interface: GDI
  • Dimension: 73.00x63.00 mm/28.74x24.8 inch

    • Shipping List

  • Gravity: Expansion Board for Raspberry Pi Pico x 1

    • Documents

    Review

    Jonathan.Groff Sep 28, 2026

    Super handy. A must for the Pico. Well labelled and provides pins and slots. Organizes by function for UART, I2C, SPI, GPIO etc. Good quality.

    Craig.Pruitt Sep 10, 2026

    Easy set up for prototyping

    Dillon.Simeone Jul 01, 2025

    Extremely convenient to use for rapid prototyping! I love how it has its own separate power supply.

    Raspberry PiRaspberry Pi Projects
    Gravity: Expansion Board for Raspberry Pi Pico / Pico 2
    $0.00