Log in to unlock Raspberry Pi 5 for $60 (was $80) with $100+ in eligible purchases.
CommunityForumWikiBlogLearn
TOP
Front of ESP32 PLC module with 10 opto-isolated I/Os and RS485 connectors-DFRobot product sku:DFR0900 image.

ESP32 PLC Module (10 Opto-Isolated I/Os & RS485, Optoisolated Output)

$239.00
SKU: DFR0900
A 10 I/O industrial PLC module with ESP32, optoisolated output, supports RS485, Ethernet, and is ideal for automation and monitoring applications.
Eligible for $60 Raspberry Pi 5 Special Add-On Deal
Purchase this product and earn 2390 reward points, which are tied to VIP membership program. Learn More >
  • PLC - CPU Arduino NANO
    PLC - CPU Arduino NANO
    $123.00
  • PLC Module - CPU ESP32
    PLC Module - CPU ESP32
    $239.00
  • Relay - CPU Arduino NANO
    Relay - CPU Arduino NANO
    $219.00
  • Relay - CPU ESP32
    Relay - CPU ESP32
    $219.00
IntroductionFeaturesApplicationsSpecificationDocumentsShipping List

Introduction

This 10 I/Os industrial PLC module(Optoisolated output) based on ESP32 devkit provides a simple and cost-effective solution to the applications of industrial monitoring and control.

It is easy to install and configure, and very flexible thanks to the Open Source-based hardware. With standardized PLC connectors, the 10 I/Os PLC module supports RS485, Ethernet and Optoisolated input/output, which could be well suitable for the monitoring, control and automation of your machines, alarms, elevator control, product lines, installations among the most typical applications such as fans, pumps, air conditioning, full HVAC solutions, control of AC and DC motors.

Board Overview

10 I/Os PLC Module - CPU ESP32 (Optoisolated Output)

10 I/Os PLC Module - CPU ESP32 (Optoisolated Output)

10 I/Os PLC Module - CPU ESP32 (Optoisolated Output)

Features

  • With 10 I/O interfaces
  • Standardized connectors
  • Supports RS485

    • Applications

  • Control and automation of machines
  • Control of AC and DC motors

    • Specification

  • MCU: ESP32 devkit
  • Power Input: 12-24V DC
  • Input Rated Voltage: 24V DC
  • Rated Power: 30W
  • Max Current: 1.5
  • Clock Speed: External 240 MHz; Internal 8MHz
  • Flash: 4MB
  • SRAM: 4MB
  • PSRAM: 2MB
  • Communication: USB-RS485-ETH-WiFi-BLE
  • Operating Voltage Range: 11.4~25.4V DC
  • Power Consumption: 30V AC MAX
  • Digital Input: 0-3.3-24V DC(10Hz）
  • Digital Isolated Output: 5-24V DC
  • Operating Temperature: 0℃~60℃
  • Operating Humidity: 10%~90%
  • Storage Temperature: -20℃~60℃
  • Ethernet Port
  • RS485
  • TCP IP
  • Modbus TCP
  • Modbus RTU

    • Documents

    Shipping List

  • 10 I/Os PLC Module - CPU ESP32 (Optoisolated Output) x1
    • ArduinoMore Arduino Related ProjectsArduino Tutorials
    Out Of Stock
    ESP32 PLC Module (10 Opto-Isolated I/Os & RS485, Optoisolated Output)
    $0.00