TOP

N20 UART Motor Module

$5.90
SKU: DFR1277
This N20 miniature metal motor module integrates an on-board driver IC and MCU, communicating with main controllers over UART. It supports Arduino libraries and open ModBus protocol for flexible control and address-based cascading. Featuring PH2.0 plug connectors without soldering, it enables quick integration for fast prototyping of robots and smart cars.
Purchase this product and earn 59 reward points, which are tied to VIP membership program. Learn More >

Introduction

This N20 miniature metal motor module integrates an on-board motor driver IC and MCU, communicating with various main controllers via a UART interface. By combining the motor, driver, and control logic into a single compact unit, this motor module simplifies wiring and reduces the hardware footprint for space-constrained robotic builds.


Flexible ModBus Control and Cascading

This UART motor module adopts the open ModBus communication protocol, enabling flexible motor control in multiple ways. Thanks to ModBus, multiple motors can be cascaded by assigning distinct addresses to each unit, with a configurable address range of 1 to 247. This cascading capability allows developers to build multi-axis motion systems without complex wiring.


Seamless Integration and Solderless Wiring

This miniature motor module comes with an Arduino library compatible with a wide range of boards. Equipped with PH2.0 connectors, this module requires no soldering, and wiring is completed simply by plugging in. This solderless design lowers the barrier for hardware setup, helping developers rapidly build prototypes.


With its integrated driver IC, cascadable ModBus architecture, and plug-and-play connectors, this N20 motor module delivers efficient development for robots, smart cars, and other related applications. The compact form factor and simple wiring accelerate prototyping and support multi-motor experiments with minimal setup effort.

Features

  • On-board motor driver IC and MCU integrated into a single module
  • UART interface with open ModBus communication protocol
  • Supports cascading multiple motors via configurable addresses (1~247)
  • Compatible with a wide range of Arduino boards via dedicated library
  • PH2.0 connectors for solderless, plug-and-play wiring
  • Compact N20 metal motor with 1:150 gearbox reduction ratio
  • Applications

  • Multi-axis robot motion systems
  • Smart car drive modules
  • Rapid prototyping and development experiments
  • Cascaded motor control projects
  • Specification

    Basic Parameters

  • Operating Voltage: DC 3.7–5V
  • Operating Current: 32mA@3.7V
  • Communication Interface: UART
  • Connector Type: PH2.0-4P (Gravity pinout)
  • UART Address: Default: 0x0001, configurable range: 1~247
  • Motor Parameters

  • Motor Speed (without reduction): 20000 rpm
  • Gearbox Reduction Ratio: 1:150
  • No-load Output Speed: 133 rpm
  • Stall Torque: 1.0 kg·cm
  • Physical Dimensions

  • Dimensions (mm): 41.2×13×20.6
  • Weight: 11 g
  • Shipping List

  • N20 PWM motor ×1
  • PH2.0-4P cable ×1
  • N20 UART Motor Module
    $0.00