3D Printing Parts category provides most selected 3D Printer parts to build a 3D printer, such as 3d printer nozzle, extruder, heater bed, temperature sensor, heater, control board, stepper motor drivers
5mm Aluminum Timing Pulley For 3D Printer (2 pcs) Introduction
This is an 20 tooth timing pulley with a center diameter of 5mm (0.2"), this is a good fit for mounting on common stepper motors. These pullies are great for many mechanical projects. They are also commonly used in 3D printers.
Inner diameter: 5mm(0.2")
Teeth diameter: 12.5mm (0.49")
Teeth Width: 6.8mm (0.27")..
8mm Aluminum Timing Pulley For 3D Printer (2 pcs) Introduction
This is an 20 tooth timing pulley with a center diameter of 8mm (0.31"). These pullies are great for many mechanical projects. They are also very commonly used in 3D printers.
inner diameter: 8mm (0.31")
Teeth diameter: 12.5mm (0.49")
Teeth Width: 6.8mm (0.27")
Outer diameter: 15 mm (0.59")
Fastening screws: M..
Brushless DC Fan For Mainboard Introduction The 7525 Turbo Fan is a noiseless high performance cooling fan. It is widely used in cooling system, like PC and 3D printer. The average operation time could arrive 40000 hours, which has met the vast majority of application scenarios.
Part No.: BD247530MB-NBE
Outline Dimension: 75x75x30 mm/2.95x2.95x1.18 inches
Rated Voltage: 24 V
Brushless DC Fan For Nozzle Introduction NMB brushless DC fan, small size with high wind air flow, make it a good module in cooling application. And this is the nozzle cooling fan for Overlord 3D printer, compatible with both overlord and Overlord Pro. You could also use it on other places.
Overlord Brushless DC Fan for Nozzle x1
Cartridge Heater for OverLord 3D Printer Introduction Are you still looking for the 3D printer cartridge heater? This is a 60W high performance heater. It is widely used in mould processing, manufacturing and someplace which need high temperature.
It is also an original conponent for OverLord 3D Printer, compatible with both the OverLord and OverLord Pro
Update: The Cartridge Heater has been updated to 24V@60W
E3D Nozzle Upgrade Kit For OverLord / OverLord Pro Introduction
This is an E3D nozzle for OverLord and OverLord Pro (models produced before October 2016).
This kit is specifically developed for OverLord 3D printer. The latest E3D V6 nozzles and auto-leveling components bring in a much rapid and accurate automatic leveling, less clog as well as better printing performance.
The kit contains:
E3D nozzle assembly
E3D nozzle maintenance accessori..
Electronics Blower Fan Introduction
This is a 2 wire (+-) blower fan for all your cooling needs.
Supply voltage: DC 12V
Current consumption: 0.3A
Blower Fan x1
Extruder 50mm Fan Introduction
This is a 50mm (1.97") cooling fan. It is powered by simple 2 wires (+-) . It features a double ball bearing which makes it running quietly and durable. It can not only be applied in 3D printer excuder but also standard PC chassis cooling fan for RAM.
Width: 50mm (1.97")
Supply voltage: 12Vdc
Grease for 3D Printer (5 gram) Introduction
This box of grease is very small, light and easy to carry. It can be uesd in many places. It is suitable for the condition of light load or high speed plastic gear, plastic parts, nylon retainer bearing lubrication, protection and noise reduction. You will need it for your robot and 3D Printer.
Net Weight : 5g
7 - 14 Days
Microswitch-5A/250V（especially for Ultimaker 3D printer） Introduction
This is a very sensitive and stable lever switch which is commomly used in industrial automation projects.
But in your DIY projetcs or robots, this is also great for detecting objects. It can be used as a bumper sensor which is simple to wire and attach to objects. This sensor is commonly found in DIY 3D printers. Another popular application is to be &nbs..
Nozzle Platform For OverLord 3D Printer Introduction
Overlord nozzle platform, aluminium alloy material, could be installed on Overlord 3D printer. Compatible with both OverLord and OverLord Pro.
Material: aluminium alloy
Thickness: 6mm (0.24")
Platform for OverLord 3D Printer x1
PEEK insulator Introduction
This is a high quality PEEK insulator and PTFE-PFA adapter for isolating the heat generated from the heater block of a 3D printer's extruder.
PEEK is a thermoplast that is stable at very high temperatures, common applications include aerospace and other high pressure high-temperature applications.
PFA Tube (1m) Introduction
This is 1 meter of PFA tubing with a 6mm diameter. PFA has a high temperature resistance with a melting point of 305C. This tubing is used as a bowden tube in some 3D printer setups.
Inner diameter: 3.85mm(0.15")
Outer diameter: 6mm(0.24")
SD Card for OverLord 3D Printer (8G SDHC) Introduction Kingston Technology Secure Digital High-Capacity (SDHC) memory cards are fully compliant with the new Secure Digital Association 2.00 specification. They are a new performance class of SD memory cards designed to meet the storage demands of high-quality digital still and video cameras and other high-resolution image recording devices.
This SD Card for OverLord 3D Printer comes with..
3D Printer Heater 19V@38W Introduction
This is a Heater used to heating the hot end which is very popular for 3D printers such as Reprap, Ultimaker and Makerbot. It has a right angle which make it easy to be installed at the hot end. 1.6m wire is long enough to suit most situation. The bright red color gives a bright warning of its heat!
Belt Tensioner For OverLord 3D Printer Introduction
This part is belt tensioner, which could adjust the tensity of the belt.
Compatible with both the OverLord and OverLord Pro.
Belt Tensioner for OverLord 3D Printer x1