Arduino common Accessories, includes bootloader programmer, enclosure, power adapter and other accessories.
USBtinyISP-Arduino bootloader programmer Introduction
This is a USB AVR programmer supported by offical Arduino IDE. Once the Arduino has lost its bootloader for some reasons, use this programmer to reburn the bootloader and save the dead Arduino.
This programmer works really well for ATmega168 and ATmega328 and should work with all the AVR micros supported by AVRDUDE. Both 10-pin and 6-pin targets supported (cable included) ..
eClip - programming Fixture Introduction eClip is an innovative programming/testing tool specially designed for Makers. It solves the problem of prototyping wearable projects with ICSP and FTDI interfaces in limited spaces.
It provides 2x4 pogo-pins function-board, which makes it much easier to design and use ICSP/FTDI based on Arduino/AVR. Whatsmore, this tool supports extension so you can design your own dedi..
Out Of Stock
XSP - Arduino Programmer Introduction
XSP Programmer is designed for Arduino/AVR device. It is a driver free programmer, supporting Arduino/AVR ISP and FTDI programming. It could provide both 5V and 3.3V power output or self-adaption power output(OFF mode). Support Xbee socket and auto-match ISP clock frequency. With this programmer, you can adjust its interface for your own device. Quite convenient and easy to use. I..
Arduino Project Enclosure Introduction
The Arduino enclosure allows you to easily enclose your Arduino main board, Arduino Mega, or any other board that fits the Arduino foot print (FEZ Domino, FEZ Panda, Netduino, etc). It simply presses shut, so you don't have to worry about screws or fasteners.
It has room internally for an Arduino and a shield. It even has a removable tab mated for use with an Ethernet shield..