Vortex software / hardware development...
kevin 2015-12-21 11:30:27 11959 Views15 Replies Hello DFRobot!
Are you going to release the Vortex source code or provide an API?
Can I connect to the Vortex using my PC via bluetooth? What is the protocol?
Are you going to publish the hardware schematic?
What is the connector on the back of the Vortex for?
Do you have drivers for the Vortex in programming mode?
Regards,
Kev
Are you going to release the Vortex source code or provide an API?
Can I connect to the Vortex using my PC via bluetooth? What is the protocol?
Are you going to publish the hardware schematic?
What is the connector on the back of the Vortex for?
Do you have drivers for the Vortex in programming mode?
Regards,
Kev
2016-06-10 07:04:09 Hi,
When can we expect to have Mac version of DF4Scratch?
I only have Mac, iPhones and iPads.
How can I program the Vortex in this environment using Scratch? sajidsaiyed
When can we expect to have Mac version of DF4Scratch?
I only have Mac, iPhones and iPads.
How can I program the Vortex in this environment using Scratch?
sajidsaiyed 2016-06-10 07:04:09 Hi,
When can we expect to have Mac version of DF4Scratch?
I only have Mac, iPhones and iPads.
How can I program the Vortex in this environment using Scratch? sajidsaiyed
When can we expect to have Mac version of DF4Scratch?
I only have Mac, iPhones and iPads.
How can I program the Vortex in this environment using Scratch?
sajidsaiyed 2016-06-03 15:57:46 Hi StéphaneLallée,
I am sorry to hear that it disappointed you so. But we are trying to make it better and better, and now, we have just finished the a wiki draft on how to program wlth Arduino, the team will double check it next week. Hope it helps, should you have any further question, suggestion, let us know please.
http://www.dfrobot.com/wiki/index.php?t ... troduction
All the best,
Leff Leff
I am sorry to hear that it disappointed you so. But we are trying to make it better and better, and now, we have just finished the a wiki draft on how to program wlth Arduino, the team will double check it next week. Hope it helps, should you have any further question, suggestion, let us know please.
http://www.dfrobot.com/wiki/index.php?t ... troduction
All the best,
Leff
Leff 2016-06-03 15:57:46 Hi StéphaneLallée,
I am sorry to hear that it disappointed you so. But we are trying to make it better and better, and now, we have just finished the a wiki draft on how to program wlth Arduino, the team will double check it next week. Hope it helps, should you have any further question, suggestion, let us know please.
http://www.dfrobot.com/wiki/index.php?t ... troduction
All the best,
Leff Leff
I am sorry to hear that it disappointed you so. But we are trying to make it better and better, and now, we have just finished the a wiki draft on how to program wlth Arduino, the team will double check it next week. Hope it helps, should you have any further question, suggestion, let us know please.
http://www.dfrobot.com/wiki/index.php?t ... troduction
All the best,
Leff
Leff 2016-06-03 12:04:12 I totally agree with Patrick. You guys are not really trustable... I backed this just to get a cheap platform to modify with Arduino, and I end up with a toy for iPad...
What would it cost you to release the arduino sketch and a one page tutorial on how to upload our custom firmwares ?
StéphaneLallée
What would it cost you to release the arduino sketch and a one page tutorial on how to upload our custom firmwares ?
StéphaneLallée 2016-06-03 12:04:12 I totally agree with Patrick. You guys are not really trustable... I backed this just to get a cheap platform to modify with Arduino, and I end up with a toy for iPad...
What would it cost you to release the arduino sketch and a one page tutorial on how to upload our custom firmwares ? StéphaneLallée
What would it cost you to release the arduino sketch and a one page tutorial on how to upload our custom firmwares ?
StéphaneLallée 2016-04-28 01:10:57 Dear DFRobot.
I begin to think that you are not really fair with your customers.
I was one of the first bakers for your kickstarter vortex project, and why did i did that ?
Because i trusted you when you promise an "open source project" and an arduino programmable robot !
And after a few months (i was patient) ...... no more open source, no schematic, no arduino library !
You do not even answer questions about that.
It's not fair, and not being fair is not good for business.
Have a nice day.
Patrick pollet patrick
I begin to think that you are not really fair with your customers.
I was one of the first bakers for your kickstarter vortex project, and why did i did that ?
Because i trusted you when you promise an "open source project" and an arduino programmable robot !
And after a few months (i was patient) ...... no more open source, no schematic, no arduino library !
You do not even answer questions about that.
It's not fair, and not being fair is not good for business.
Have a nice day.
Patrick
pollet patrick 2016-04-28 01:10:57 Dear DFRobot.
I begin to think that you are not really fair with your customers.
I was one of the first bakers for your kickstarter vortex project, and why did i did that ?
Because i trusted you when you promise an "open source project" and an arduino programmable robot !
And after a few months (i was patient) ...... no more open source, no schematic, no arduino library !
You do not even answer questions about that.
It's not fair, and not being fair is not good for business.
Have a nice day.
Patrick pollet patrick
I begin to think that you are not really fair with your customers.
I was one of the first bakers for your kickstarter vortex project, and why did i did that ?
Because i trusted you when you promise an "open source project" and an arduino programmable robot !
And after a few months (i was patient) ...... no more open source, no schematic, no arduino library !
You do not even answer questions about that.
It's not fair, and not being fair is not good for business.
Have a nice day.
Patrick
pollet patrick 2016-01-13 10:37:26 Hello Jan, thanks for your interest.
At this time the source code and schematic is not public. Currently available resources can be found at this link: http://www.dfrobot.com/vortex/download.html Maht
At this time the source code and schematic is not public. Currently available resources can be found at this link: http://www.dfrobot.com/vortex/download.html
Maht 2016-01-13 10:37:26 Hello Jan, thanks for your interest.
At this time the source code and schematic is not public. Currently available resources can be found at this link: http://www.dfrobot.com/vortex/download.html Maht
At this time the source code and schematic is not public. Currently available resources can be found at this link: http://www.dfrobot.com/vortex/download.html
Maht 2015-12-25 06:54:58 Will you make the default firmware/sources, or at least the connections, public?
Thanks.
Jan shop_dfrobot
Thanks.
Jan
shop_dfrobot 2015-12-25 06:54:58 Will you make the default firmware/sources, or at least the connections, public?
Thanks.
Jan shop_dfrobot
Thanks.
Jan
shop_dfrobot 2015-12-21 11:30:27 Hello DFRobot!
Are you going to release the Vortex source code or provide an API?
Can I connect to the Vortex using my PC via bluetooth? What is the protocol?
Are you going to publish the hardware schematic?
What is the connector on the back of the Vortex for?
Do you have drivers for the Vortex in programming mode?
Regards,
Kev kevin
Are you going to release the Vortex source code or provide an API?
Can I connect to the Vortex using my PC via bluetooth? What is the protocol?
Are you going to publish the hardware schematic?
What is the connector on the back of the Vortex for?
Do you have drivers for the Vortex in programming mode?
Regards,
Kev
kevin 
