Re: How to make bluno become a Bluetooth joypad

Hi!
Could You test it on any Android (> 4.4) phone/tablet with Bluetooth 4.0 module? Is there Bluno correctly detected as Bluetooth HID device?
Could You test it on any Android (> 4.4) phone/tablet with Bluetooth 4.0 module? Is there Bluno correctly detected as Bluetooth HID device?
2018-01-24 22:52:11 Please use the link of " or Download source 2, suggested, commented by Admin"
robert.chen

2018-01-24 22:52:11 Please use the link of " or Download source 2, suggested, commented by Admin"
robert.chen

2018-01-24 22:52:11 Please use the link of " or Download source 2, suggested, commented by Admin"
robert.chen

2018-01-23 16:46:10 I would like to load the newest firmware onto the Bluno M0 mainboard board but the zip file is empty https://github.com/DFRobot/.... Where can I download the newest firmware. Also I have used bluetooth HID successfully on other bluno boards and it works well. I am following the instructions in this tutorial (except I am using 3v gravity sensors instead of game shield) but I can't get it to work on the Bluno M0 board can you verify if it works on the M0 bluno board.
jason

2018-01-23 16:46:10 I would like to load the newest firmware onto the Bluno M0 mainboard board but the zip file is empty https://github.com/DFRobot/.... Where can I download the newest firmware. Also I have used bluetooth HID successfully on other bluno boards and it works well. I am following the instructions in this tutorial (except I am using 3v gravity sensors instead of game shield) but I can't get it to work on the Bluno M0 board can you verify if it works on the M0 bluno board.
jason

2018-01-23 16:46:10 I would like to load the newest firmware onto the Bluno M0 mainboard board but the zip file is empty https://github.com/DFRobot/.... Where can I download the newest firmware. Also I have used bluetooth HID successfully on other bluno boards and it works well. I am following the instructions in this tutorial (except I am using 3v gravity sensors instead of game shield) but I can't get it to work on the Bluno M0 board can you verify if it works on the M0 bluno board.
jason

2016-07-02 08:17:29 Hi,
The "bluehid.rar" sample file with code can't be downloaded anymore. The link leads me to a chinese message that seems to say I don't have permission to download.
Can you please provide it again? Also, it's possible to have proper Bluetooth HID mode documentation? I.e. commands to send keystrokes and how to pair it with Android properly.
Thanks,
Hugo.
hhromic.ireland
The "bluehid.rar" sample file with code can't be downloaded anymore. The link leads me to a chinese message that seems to say I don't have permission to download.
Can you please provide it again? Also, it's possible to have proper Bluetooth HID mode documentation? I.e. commands to send keystrokes and how to pair it with Android properly.
Thanks,
Hugo.

2016-07-02 08:17:29 Hi,
The "bluehid.rar" sample file with code can't be downloaded anymore. The link leads me to a chinese message that seems to say I don't have permission to download.
Can you please provide it again? Also, it's possible to have proper Bluetooth HID mode documentation? I.e. commands to send keystrokes and how to pair it with Android properly.
Thanks,
Hugo.
hhromic.ireland
The "bluehid.rar" sample file with code can't be downloaded anymore. The link leads me to a chinese message that seems to say I don't have permission to download.
Can you please provide it again? Also, it's possible to have proper Bluetooth HID mode documentation? I.e. commands to send keystrokes and how to pair it with Android properly.
Thanks,
Hugo.

2016-07-02 08:17:29 Hi,
The "bluehid.rar" sample file with code can't be downloaded anymore. The link leads me to a chinese message that seems to say I don't have permission to download.
Can you please provide it again? Also, it's possible to have proper Bluetooth HID mode documentation? I.e. commands to send keystrokes and how to pair it with Android properly.
Thanks,
Hugo.
hhromic.ireland
The "bluehid.rar" sample file with code can't be downloaded anymore. The link leads me to a chinese message that seems to say I don't have permission to download.
Can you please provide it again? Also, it's possible to have proper Bluetooth HID mode documentation? I.e. commands to send keystrokes and how to pair it with Android properly.
Thanks,
Hugo.

2016-04-14 23:53:36
Hi Diamantini,
Welcome, sorry for missing your post so long. Are you asking what's the Arduino model in the picture of Cain? If so, it should be a Bluno.
Leff
Diamantini Manrico wrote:HI!
i need the arduino shield or i can make my own set of buttons? thanks.
Hi Diamantini,
Welcome, sorry for missing your post so long. Are you asking what's the Arduino model in the picture of Cain? If so, it should be a Bluno.

2016-04-14 23:53:36
Hi Diamantini,
Welcome, sorry for missing your post so long. Are you asking what's the Arduino model in the picture of Cain? If so, it should be a Bluno.
Leff
Diamantini Manrico wrote:HI!
i need the arduino shield or i can make my own set of buttons? thanks.
Hi Diamantini,
Welcome, sorry for missing your post so long. Are you asking what's the Arduino model in the picture of Cain? If so, it should be a Bluno.

2016-04-14 23:53:36
Hi Diamantini,
Welcome, sorry for missing your post so long. Are you asking what's the Arduino model in the picture of Cain? If so, it should be a Bluno.
Leff
Diamantini Manrico wrote:HI!
i need the arduino shield or i can make my own set of buttons? thanks.
Hi Diamantini,
Welcome, sorry for missing your post so long. Are you asking what's the Arduino model in the picture of Cain? If so, it should be a Bluno.

2016-04-12 06:07:29 HI!
i need the arduino shield or i can make my own set of buttons? thanks.
Diamantini Manrico
i need the arduino shield or i can make my own set of buttons? thanks.

2016-04-12 06:07:29 HI!
i need the arduino shield or i can make my own set of buttons? thanks.
Diamantini Manrico
i need the arduino shield or i can make my own set of buttons? thanks.
