Holiday Notice: We're away from Apr 30 to May 5, but our store is open 24/7! All orders placed now will be promptly processed and shipped on May 6.
CommunityForumWikiBlogLearn
TOP
Front of mini ESP32 board with USB and WiFi Bluetooth components-DFRobot product sku:DFR0625 image.
Overhead shot of compact IoT board with space-constrained design.
Angled shot of front of compact IoT device with WiFi Bluetooth connectivity
Detail of compact IoT board with space-constrained design
Angled shot of ESP32-PICO-KIT-1 for compact IoT projects with WiFi Bluetooth capabilities
Angled shot of dual core ESP32 board for compact IoT projects
Angled shot of ESP32-PICO-KIT-1 compact IoT board with Wi-Fi & Bluetooth connectivity
Side shot of compact IoT board with ESP32-PICO-V3 System-in-Package
Angled shot of compact IoT device with ESP32-PICO-KIT-1 board showing Wi-Fi & Bluetooth controls and sensor readings

ESP32-PICO-KIT Development Board (Wi-Fi & Bluetooth)

$13.90
SKU: DFR0625
The ESP32-PICO-KIT-1 is a development board featuring Wi-Fi and Bluetooth capabilities, a USB-to-UART bridge circuit, and various module interfaces for easy hardware connectivity.
Purchase this product and earn 139 reward points, which are tied to VIP membership program. Learn More >
    IntroductionSpecificationShipping List Documents Resource Review

    Introduction

    The ESP32-PICO-KIT-1 is a compact development board featuring the ESP32-PICO-V3 System-in-Package (SiP) module. The module integrates the ESP32 dual-core processor, a 40 MHz crystal, and 4 MB of SPI flash. The board provides complete Wi-Fi (802.11 b/g/n) and Bluetooth v4.2 BR/EDR/BLE functionality. All I/O pins are broken out to 18-pin headers on each side for easy interfacing with breadboards. It includes an onboard USB-to-UART bridge, allowing for direct programming and debugging from a PC via a USB port.

    The ESP32-PICO-KIT-1 development board also integrates a USB-to-UART bridge circuit, allowing developers to burn and debug firmware directly through the USB port of a PC.

    In order to facilitate hardware connection, all IO signals and system power pins on ESP32-PICO-V3 are led to pads on both sides of the development board (18 x 0.1"). The above 18 pads are also led to pin headers and can be used Dupont wire connections.

    Specification

    Wi-Fi

  • Protocols: 802.11 b/g/n (802.11n up to 150 Mbps)
                A-MPDU and A-MSDU aggregation and 0.4 µs guard interval support
  • Frequency: 2.4 ~ 2.5 GHz


    Bluetooth

  • Protocols: Bluetooth V4.2 BR/EDR and BLE specification
  • Radio: NZIF receiver with –97 dBm sensitivity
                Class-1, class-2 and class-3 transmitter
                AFH
  • Audio: CVSD and SBC


    Hardware

  • Module Interfaces: ADC, DAC, touch sensor, SD/SDIO/MMC Host Controller, SPI, SDIO/SPI Slave Controller, EMAC, motor PWM, LED PWM, UART, I2C, I2S, infrared remote controller, GPIO, pulse counter
  • On-chip sensor: Hall sensor
  • Integrated crystal: 40 MHz crystal
  • Integrated SPI flash: 4 MB
  • Operating voltage/Power supply: 2.7V~3.6V
  • Average Operating current: 80 mA
  • Minimum current delivered by power supply: 500 mA
  • Operating temperature range: –40 °C ~ 85 °C
  • Package size: 47 x 20.3 x 10 mm/1.85 x 0.80 x 0.39”

    • Shipping List

    • ESP32-PICO-KIT-1 Development Board x1

    Documents

    Resource

    AllProjectsBlogTutorialCourseMedia
    ESP32 cpplinq Tutorials Menu

    Blog ESP32 cpplinq Tutorials Menu

    DFRobot
    Apr 25, 2021
    ESP32 HTTP server Tutorials Menu

    Blog ESP32 HTTP server Tutorials Menu

    DFRobot
    Apr 25, 2021
    ESP32 Soft AP Tutorials Menu

    Blog ESP32 Soft AP Tutorials Menu

    DFRobot
    Apr 25, 2021
    ESP32 MicroPython Tutorials Menu

    Blog ESP32 MicroPython Tutorials Menu

    DFRobot
    Apr 01, 2021
    ESP32 Arduino Tutorials Menu

    Blog ESP32 Arduino Tutorials Menu

    DFRobot
    Apr 20, 2021
    ESP32 PS3 and PS4 Tutorials Menu

    Blog ESP32 PS3 and PS4 Tutorials Menu

    DFRobot
    Apr 25, 2021
    More

    Review

    Premjit.Tarafdar Apr 20, 2026

    excellent build quality and stable hardware. recommended

    Premjit.Tarafdar Apr 20, 2026

    very stable and well made, we use these for prototyping

    Premjit.Tarafdar Apr 20, 2026

    very stable and solid well made board

    More
    ESP32/ESP8266Internet of Things - IoTIoT ProjectsESP32 / ESP8266 ProjectsESP32 TutorialsESP8266 Tutorials
    Only 4 Left
    ESP32-PICO-KIT Development Board (Wi-Fi & Bluetooth)
    $0.00