productphoto

RS485 Wind Vane Direction Sensor

SKU:SEN0482 Brand:Other Reward Points: 450
$45.00
Only 5 Left
Quantity Based Price
  • QTYDISCOUNT
  • 3-4$44.00
  • 5-9$43.00
  • 10+$41.40
* Model:
Quantity:
Expected Restock Date: [[restockDate]]

You have chosen:[[togetherChouseinfo.num]]

Total amount: [[currency]][[togetherChouseinfo.price]] [[togetherChouseinfo.price]][[currency]]

Introduction

The wind direction sensor (also known as wind vane) is a professional meteorological instrument used to measure horizontal wind direction. It integrates a hall sensor inside. The shell and weather vane are made of aluminum alloy material and use special mold precision die casting process, featuring small dimension tolerance and high surface accuracy. The sensor internal circuit is protected, which makes the sensor have the properties of high strength, weather resistance, anti-corrosion, and waterproof. The cable connector adopts corrosion-resistant military plug that ensures the long service life of the product.

A low-inertia wind direction sensor is used to sense the wind direction. When the wind direction changes, the tail wing rotates to drive the axle magnet to rotate through the shaft, thereby obtaining accurate wind direction information. It can detect the 16 natural wind directions. This sensor with high cost performance can be widely used in meteorology, ocean, environment, airports, ports, laboratories, industry, agriculture and transportation.


How does a wind vane work?

1. Wind Vane: The nose of the vane always points into the wind direction. This is because the wind applies a force on the flat surface of the vane, causing it to rotate until it aligns with the wind direction.

2. Signal Conversion: Attached to the vane is either a potentiometer or a magnetic sensor. This device converts the rotational movement of the vane into an electrical signal.

3. Signal Processing: The electrical signal is then processed to determine the wind direction.

Connection Diagram of RS485 Wind Direction Sensor, RS485 to UART Signal Adapter Module and Arduino Uno

Connection Diagram of RS485 Wind Direction Sensor, RS485 to UART Signal Adapter Module and Arduino Uno


Dimension Diagram of RS485 Wind Vane

Dimension Diagram of RS485 Wind Vane

Features

  • High measurement accuracy, fast response, and good interchangeability
  • Easy to install and operate
  • High sensitivity: start-up wind speed ≤ 0.3m/s
  • Suitable for various harsh environments, strong wind resistance
  • Specification

  • Measuring Range: 16 directions & wind direction of 360°
  • Start-up Wind Speed: 0.3m/s
  • Lead Length: 2.5m/8.20"
  • Power Voltage: 7-24V
  • Communication Protocol: RS485 interface Modbus protocol
  • Documents

    Shipping List

  • RS485 Wind Direction Transmitter x1
  • 2.5m Wire x1
  • REVIEW

    reviewImage
    [[r.author]]
    [[r.date_added]]

    FAQ

    RS485 Wind Vane Direction Sensor

    $45.00
    Only 5 Left
    QTY DISCOUNT
    • 3-4$44.00
    • 5-9$43.00
    • 10+$41.40
    Quantity:

    BACK TO TOP