Holiday Shipping Notice: DFRobot will be out of office Sep 30 – Oct 7 (UTC+8) for the National Day holiday. Shipping resumes Oct 8.
CommunityForumWikiBlogLearn
TOP
  • Store
  • Gravity: Capacitive Non-contact Liquid Level Sensor (3mm TR) (Discontinued)
Front view of Capacitive Liquid Level Sensor for Arduino-DFRobot product sku:FIT0212 image.
Overhead shot of Capacitive Liquid Level Sensor with 7-pin and 15-pin connectors for Arduino water level detection.
Front of Capacitive Non-contact Liquid Level Sensor for Arduino with yellow and red cables and black connector
Angled shot of a small black rectangular capacitive liquid level sensor with red and yellow wires.
Angled shot of Capacitive Non-contact Liquid Level Sensor with black, red, and yellow wires for Arduino applications.
Angled shot of three-pin connector for Capacitive Liquid Level Sensor with colored wires.
Angled shot of Capacitive Level Sensor with 3-pin SATA connector and red, yellow, black wires.

Gravity: Capacitive Non-contact Liquid Level Sensor (3mm TR) (Discontinued)

$0.00
SKU: FIT0212

Discontinued

This product has been retired from our catalog and is no longer for sale. This page is made available for those looking for specification and documents.

IntroductionSpecificationShipping List Documents

Introduction

 Attention: The new version of the product will no longer have sponge gaskets after the update. Please refer to the new product picture.

This non-contact liquid level switch can be triggered when the liquid level falls below the sensor attached to the outside surface of a non-metal container.
 
Unlike traditional liquid level sensors, it does not need to be immersed in liquid. So, in this way, the liquid will not be contaminated and the life of the sensor will not be reduced so fast because of the contact between liquid and sensors.
 
The sensor is very sensitive and stable, and the output current is up to 100mA which can directly drive a relay.
 
You can use this switch to monitor the condition of your water machine or make a water-drinking reminder by attaching it to the surface of your cup.
 

Thickness Range

Connection Diagram

Specification

  • Power supply: +5V
  • Working current: 25μA
  • Working temperature: -25~125℃
  • Thickness Range(TR): 1~3mm

Shipping List

  • Gravity: Capacitive Non-contact Liquid Level Sensor(3mm TR)      x1

Documents