productphoto

Freematics OBD-II Emulator MK2(Discontinued)

SKU:TEL0099 Brand:Other
$0.00
Discontinued
Categories: All Products
Discontinued

This product has been retired from our catalog and is no longer for sale. This page is made available for those looking for specification and documents.

Expected Restock Date: [[restockDate]]

Introduction

Freematics OBD-II Emulator MK2 is world’s smallest OBD-II emulator with KWP2000, ISO9141 and CAN bus simulation. It provides an 16-pin female OBD-II port which is identical to that of a real car and responds to requests for standard OBD-II PIDs from plugged-in OBD-II compliant device. It emulates up to 6 active vehicle diagnostic trouble code (DTC) as if a real car has when encountering a component malfunction or fault. Request for VIN is also responded and the VIN can be altered. The emulator connects to PC via USB cable and is operated via an easy-to-use software GUI. Secondary development is possible with serial TTL connector available for connection of interaction with Arduino or other embedded system with source of data (e.g. sensors). Freematics OBD-II Emulator is practically useful and cost effective for OBD-II related application development on desk. Once extended with external data source, it can even be used to provide an OBD-II port for vehicles that don’t have a real one and thus existing OBD-II device/software can also work with the vehicle.

The emulator is controlled by GUI software via USB interface. The BLE enabled version provides additional wireless control by iOS device (iPad/iPhone) with our Freematics Emulator App.

Hardware Features
  • Emulating standard 16-pin OBD-II port
  • Simulating vehicle data bus (CAN, KWP2000, ISO9141-2)
  • Responding to all OBD-II PIDs polls
  • Responding to DTC and VIN requests
  • Providing both power and emulated data for OBD-II compliant devices
  • Adjusting values of all OBD-II PIDs
  • Setting diagnostic trouble code (DTC)
  • Changing vehicle identification number (VIN)
  • Switching between supported protocols
  • USB and TTL serial controlling interfaces (controlled by PC or micro-controller/Arduino)
  • Firmware upgradable
  • Embedded BLE for wireless control via iOS App

Following protocols are simulated
  • CAN 500Kbps/11bit
  • CAN 250Kbps/11bit
  • CAN 500Kbps/29bit
  • CAN 250Kbps/29bit
  • ISO9141-2
  • KWP2000 Fast
  • KWP2000 5Kbps

Specification

  • OBD-II Port: 16-pin female
  • Power Input: DC 12V
  • 6-pin XH-2.54 socket (Tx/Rx/GND/3.3V/5V/12V)
  • Support USB port

Documents

Shipping List

  • Freematics OBD-II Emulator MK2         x1
  • USB Cable         x1
  • Wall Adapter Power Supply 12V@2A         x1

REVIEW

reviewImage
[[r.author]]
[[r.date_added]]

FAQ