0
logo
logo
productphoto

1.75mm PLA (1kg) - Black

SKU:FIT0292-BK Brand:DFRobot Reward Points: 20
$28.55 Discontinued
Price in Reward Points:2850
Quantity Based Price
  • QTYDISCOUNT
  • 2-4$28.00
  • 5-9$27.50
  • 10+$26.50
* Model:
Quantity:

Introduction

This is 1.75mm PLA filament which is commonly used by reprap, Makerbot, Mendel, Huxley UP! Printer, WeisTek and Thing-o-matic  3D printers. It comes with one spool that can be easily attached on 3D printer.
PLA is a wonderful filament. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors. 
Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch ,tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions. 
As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 215℃ to 225℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.
 

Specification

  • Diameters: 1.75mm(0.07")
  • Weight:1kg
  • PLA Parameter
    • Physical Property                       Typical value 
    • Tensile Strength@Yield             46Mpa
    • Tensile Elongation@Break        20%
    • Flexural Strength                       70Mpa
    • Flexural Modulus                       3212Mpa
    • Notched lzod lmpact(23℃)        5.2kj/㎡
    • HDT@66psi                               58℃
    • density                                       1.31g/cm3
    • MFR                                            10-14g/10min
    • Accuracy                                    1.75±0.1mm (0.07±0.004")

Shipping List

  • PLA 1.75mm(0.07")/1kg     x1

TUTORIAL

  • How To Make Your Own Personalized Power Bank (3D Printing)
    2016-09-13 10:08:34
  • How to Make an 3D Printing Automatic Flip Frame
    2016-09-13 12:17:35
  • Make a Polaroid Camera Using a Raspberry Pi
    2016-09-13 12:25:22

REVIEW

1.75mm PLA (1kg) - Black

$28.55
Discontinued
QTY DISCOUNT
  • 2-4$28.00
  • 5-9$27.50
  • 10+$26.50
Quantity:

BACK TO TOP