SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe)

This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test.
The SHT20 I2C temperature & humidity sensor adopt Sensirion techniques. Except the humidity sensor of capacitive type and the temperature sensor of band gap , SHT20 contains an amplifier, A/D converter, OTP memory and a digital processing unit. Compared with early SHT1x series and SHT7x series, SHT20 shows a strong reliability and long-term stability. It can measure surrounding environment temperature and relative air humidity precisely.
There is also a built-in 10k Pull-up resistor and 0.1uf filter capacitor. It enables the sensor to be directly used with the microcontroller such as Arduino. We recommend DFRobot Gravity 4Pin Sensor Adapter convenient.
Sensor Interface:

Red VCC

Green GND

Blue (Black) SDA

Yellow (White) SCL

Operating Voltage: 3.3/5V

Communication Interface: I2C

Protection Class: waterproof anti-condensation

RH Response Time: 8s (tau63%)

Accuracy: ±3% RH / ±0.3 ℃

Measuring Range: 0-100% RH / -40-125 ℃

Dimension: 73mm * 17mm / 2.87 * 0.67 inches

Weight: 44g

Project 1. Smart Compost Bin Monitoring System -Based on 4G IoT and SHT20

Introduction:

The other day my friend asked me to help him remake his compost bin, he wants a device that allows him to remotely get the real-time temperature and humidity inside. So I add some electronic parts on it.

Product WIKI
SHT20 Datasheet

SHT20 I2C Temperature & Humidity Sensor (Waterproof Probe) x1

Jumper Wires 7.8" F/F x4