CommunityForumWikiBlogLearn
TOP
Front of MEMS Gas Sensor module detecting CO and NH3-DFRobot product sku:SEN0377 image.
Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514 (Discontinued)_1
Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514 (Discontinued)_2
Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514 (Discontinued)_3
Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514 (Discontinued)_4
Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514 (Discontinued)_5
Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514 (Discontinued)_6
Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514 (Discontinued)_7
Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514 (Discontinued)_8

Gravity: MEMS Gas Sensor (CO, Alcohol, NO2 & NH3) - I2C - MiCS-4514 (Discontinued)

$39.90
SKU: SEN0377

Discontinued

This product has been retired from our catalog and is no longer for sale. This page is made available for those looking for specification and documents.

IntroductionFeaturesApplicationsSpecificationDocumentsShipping List Resource Review

Introduction

This is a 3.3/5V compatible MEMS gas concentration sensor from DFRobot.

This sensor supports the detection of various gas concentrations like CO, C2H5OH (Alcohol), H2, NO2, NH3, and integrates various gas concentration conversion formulas in the code to facilitate the testing and use of sensors.

With I2C output and 3.3~5.5V wide voltage input, it is compatible with Arduino, ESP32, Raspberry Pi and other mainstream controllers.

Gravity: MEMS Gas Sensor

Board Overview

Features

  • Support detection of a variety of harmful gas
  • Integrate the calculation formulas of various gas concentration
  • Low power consumption
  • I2C digital output
  • Compatible with the 3.3~5.5V master controller

    • Applications

  • Gas leak detection
  • Gas safety equipment
  • Air environment detection

    • Specification

  • Detection of Physical Quantities: gas concentration of CO，C2H5OH(Alcohol), H2, NO2, NH3, CH4
  • Operating Voltage: 3.3～5.5V DC
  • Power Dissipation: 0.45W(5V)
  • Output Signal: I2C (0~3V)
  • Measuring Range:
             1 – 1000ppm (Carbon monoxide CO)
             0.05 – 10ppm (Nitrogen dioxide NO2)
             10 – 500ppm (Ethanol C2H5OH)
             1 – 1000ppm (Hydrogen H2)
             1 – 500ppm (Ammonia NH3)
             >1000ppm (Methane CH4)
  • Working Temperature: -30～85℃
  • Working Humidity: 5～95% RH(No condensation)
  • Storage Temperature: -40~85℃
  • Lifespan: >2 years (in the air)
  • Circuit Board Size: 27mm* 37mm
  • Mounting Hole Size: inner diameter 3.1mm/ outer diameter 6mm

    • Documents

    Shipping List

  • Gravity: MEMS CO, Alcohol, NO2 & NH3 Gas Sensor x1
  • Gravity-4pin I2C Cable x1

    • Resource

    AllProjectsBlogTutorialCourseMedia
    DFRobot Gas Sensor Selection Guide

    Blog DFRobot Gas Sensor Selection Guide

    DFRobot
    Jun 26, 2022
    Building a TinyML powered Electronic Nose (E-nose) with MEMS Gas Detection Sensor and Edge Impulse

    Projects Building a TinyML powered Electronic Nose (E-nose) with MEMS Gas Detection Sensor and Edge Impulse

    portrait
    RiverTrue
    Jan 23, 2025

    Review

    Given.Malau Mar 28, 2025

    works fine, good job

    ArduinoRaspberry PiRaspberry Pi ProjectsMore Arduino Related ProjectsArduino Tutorials