productphoto

BMP085 Breakout(Discontinued)

SKU:SEN0120 Brand:DFRobot
$0.00
Discontinued
Categories: All Products
Discontinued

This product has been retired from our catalog and is no longer for sale. This page is made available for those looking for specification and documents.

Expected Restock Date: [[restockDate]]

Introduction

BMP085 Breakout is discontinued now. We recommend these IMU Sensors as suitable replacement where you might find some other alternatives.

This is a simple breakout board for the BMP085 high-precision, low-power barometric pressure sensor from DFRobot. The BMP085 offers a measuring range of 300 to 1100 hPa with an absolute accuracy of down to 0.03 hPa. It's based on piezo-resistive technology for EMC robustness, high accuracy and linearity as well as long term stability. This sensor supports a voltage supply between 1.8 and 3.6VDC. It is designed to be connected directly to a micro-controller via the I2C bus
 
This breadboard-friendly board breaks out all pins of the BMP085 to a 6-pin 0.1" pitch header. The analog and digital supplies (VDDD and VDDA) of the BMP085 are tied together and broken out to a single pin. We've also put two 4.7k pull-up resistors on the I2C lines.

This NodeMCU IoT project is a simple demonstration on how to send sensor data to the Internet. 
Hardware Needed:

Specification

  • Digital two wire (I2C) interface
  • Wide barometric pressure range
  • Flexible supply voltage range
  • Ultra-low power consumption
  • Low noise measurement
  • Fully calibrated
  • Temperature measurement included
  • Ultra-flat, small footprint
  • Dimensions:16 x 16 mm (0.63 x 0.63")

Documents

Shipping List

  • BMP085 Breakout x1

REVIEW

reviewImage
[[r.author]]
[[r.date_added]]

FAQ