As the new year has come, we list the top 10 Bestselling of 2020 on the basis of selling data. Let's check what those tops are!
Introduction: This kit includes LattePanda Alpha 864s(Win10 Pro activated) and the bestselling accessories(Titan Case, Streaming Cable, and Touch Display).
The LattePanda Alpha, based on Intel Core™ m3-8100Y, is a Dual-Core 1.1GHz CPU that bursts up to 3.4GHz, Intel® UHD Graphics 615 integrated into the processor deliver enhanced media conversion, fast frame rates, and 4K Ultra HD (UHD) video.
Introduction: The DFRobot Expansion shield introduced to the market the famous color code for sensors and actuators' input and output.
Original Price:$8.90 Special Offer: $7.5
Introduction: This is an Arduino-compatible TDS Meter Kit for measuring TDS value of the water, to reflect the cleanliness of the water. It can be applied to domestic water, hydroponic and other fields of water quality testing.
Original Price:$11.8 Special Offer: $9.9
Introduction: DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of aqueous solution, and then to evaluate the water quality, which is often used in water culture, aquaculture, environmental water detection and other fields.
Original Price:$69.9 Special Offer: $59
Introduction: DFRobot Gravity: Analog pH meter V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in various applications such as aquaponics, aquaculture, and environmental water testing.
Original Price:$39.5 Special Offer: $34
Introduction: The DS18B20 temperature sensor provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface so that only one wire (and ground) needs to be connected from a central microprocessor. Compatible with 3.0-5.5V systems.
Original Price:$7.5 Special Offer: $6.5
Introduction:FireBeetle Board - ESP32 integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. The electric current is just 10μA in the deep-sleep mode. The main controller supports two power supply methods: USB and 3.7V external lithium battery. And both USB and external DC can charge the Lipo battery directly.
Original Price:$19 Special Offer: $14.9
Introduction:This is a non-contact water / liquid level sensor for Arduino. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection.
Original Price:$9.9 Special Offer: $7.9
Introduction:The Arduino turbidity sensor detects water quality by measuring the level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. As the TTS increases, the liquid turbidity level increases.
Original Price:$9.9 Special Offer: $8.1
Introduction:This is a water pressure sensor adopts DFRobot Gravity 3-pin interface. It supports standard 5V voltage input and 0.5~4.5V linear voltage output. It is compatible with multiple Arduino controllers.
Original Price:$12.9 Special Offer: $12.5