Gravity: Analog Slide Position (Potentiometer) Sensor For Arduino Introduction
This arduino Slide Position Sensor is based on straight-slip slide potentiometer sensor. The sensor is able to give provide the position of the slider which is often considered as a linear potentiometer . The sensor includes two analog outputs to allow the user to average the values and minimize random sensor fluctuations. To ease the difficult of using this sensor,  ..
Gravity:Analog Rotation Potentiometer Sensor V1 For Arduino Introduction
This is an arduino rotation potentiometer , it is able to rotate upto 300-degree. With the Arduino IO expansion board, in combination, it can be very easy to achieve position-dependent interaction with the rotating effect or produce MIDI instrument. So with this sensor you can learn how rotary potentiometer works and what analog signal is. You can have much fun with this basi..
Gravity:Analog Rotation Potentiometer Sensor V2 For Arduino Introduction
This Arduino Rotation Potentimeter Sensor is a multi-ring rotation sensor. It is based on multi-turn precision potentiometer. It can rotate upto 10 laps. The voltage can be subdivided into 1024 copies. This sensor provides a more accurate reading. This is sensor can also be used as a simple encoder if the rotation degree is not over 3600 degree. Gravity(sensors, shie..
Gravity: 360 Degree Hall Angle Sensor Introduction
The Hall Angle Sensor is a miniature 360 degree sensor which works based on the principle of the Hall effect. It is compatible with the DFRobot Gravity sensor interface, and works with a 5V DC power supply. The analog output is also 0~5V so it can work directly with Arduino.
The Hall angle sensor works by converting its angle information to an electrical signal. When the rotation ..
Gravity:Analog Rotary Switch Module V1 Introduction
A rotary switch is a switch operated by rotation. It is often used when more than 2 positions are needed, such as multi-speed control. The Rotary Switch uses an analog input to read the 12 state which saves IO resource for the Arduino. This Rotary Switch Module has 12 positions. Each position has the appropriate indicator. You can also adjust metal buckle inside the switch to cha..