Built-in GPS Antenna (with amplifing function) Introduction
This is a built-in GPS Antenna for DFRobot LEA-6H GPS shield. This GPS Antenna also have amplifing function. Its SMA male header can adapt to most GPS/GSM modules which have MMCX interface. This antenna is so qualified that it has been used on many navegation intruments and cellphones.
Working voltage: 3+0.3V
Current consumption: 15 mA (Typic..
DFRduino GPS Shield For Arduino (ublox LEA-6H) Introduction DFRduino GPS Shield for Arduino has now been updated to ublox LEA-6H.
The LEA-6H is a high performance stand-alone GPS and GALILEO receiver module designed to allow easy, straightforward migration from its LEA-4 predecessors. It features u-blox' KickStart weak signal acquisition technology, as well as flexible connectivity options. The LEA-6H comes with built-in Flash memory that ..
GPS Module with Enclosure Introduction You must have used a GPS receiver. It is easy to be found in most places, such as smartphones, cars, and computers. They are used to track your loaction all over the globe.
GPS Receiver for Arduino is a unit embedding GPS module and antenna in a small foot-print enclosure. By using TinyGPS library, Arduino can retrieve geographic coordinates (latitude and longitude, altitude), speed,..
SIM808 GPS/GPRS/GSM Shield For Arduino Introduction SIM808 GPS/GPRS/GSM Arduino Shield is an integrated quad-band GSM/GPRS and GPS navigation technology Arduino shield. A credit card size only, according to the standard Arduino pin packaging, compatible with Arduino UNO, arduino Leonardo, arduino Mega and other mainboard. Compared to the previous generation SIM908, SIM808 made some improvement on performance and stability. In addition ..
SIM808 GSM/GPRS/GPS Arduino IOT Board Introduction
This is an Arduino Leonardo with SIM808 GSM/GPRS/GPS. The SIM808 with Leonardo mainboard is the latest Arduino board developed by DFRobot for multi-purpose applications. The onboard SIM808 module includes an integrated quad-band GSM/GPRS and GPS satellite navigation module, and a 4 layer PCB integrates the microcontroller, microphone, headphone jack and GPRS/GPS, giving this board..
LS20031 GPS 5Hz GPS Receiver Introduction
This LS20031 GPS Receiver is Discontinued Now, We recommend GPS Receiver for Arduino as a suitable replacement.The LS20031 GPS receiver is a complete 5Hz GPS smart antenna receiver, that includes an embedded antenna and GPS receiver circuits. This low-cost unit outputs an astounding amount of position information 5 times a second. The receiver is based on the proven technology found..
SIM 908 GPS/GPRS/GSM Shield For Arduino Introduction
This is an Arduino GPS/GPRS/GSM shield from DFRobot. This shield with a Quad-band GSM/GPRS engine works on frequencies EGSM 900MHz/DCS 1800MHz and GSM850 MHz/PCS 1900MHz. It also supports GPS technology for satellite navigation. It's possible for your robot and control system to send messages and use the GSM network.
It is controlled via AT commands (GSM07.07 ,07.05 ..
GPS Receiver for Arduino (Model B) Introduction
This GPS Receiver is Discontinued Now, We recommend GPS Receiver for Arduino (Model A) as a suitable replacement.This GPS module is based on U-BLOX G7020 solution with ceramic antena and magnet embedded in the enclosure. By using TinyGPS or TinyGPS++ library, Arduino can easily retrieve geographic data (latitude and longitutde, altitude), velocity, heading angle and ..
GPS Receiver for Arduino (Model A) Introduction
This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement.GPS receivers can be easily found in daily life, such as smartphones, cars, and tablets. They are used to track the loaction all over the globe.
This GPS Receiver for Arduino is a unit which embeds a GPS module and an antenna in a small foot-print enclosure..