Topics

538 Views

0 Replies
I cannot upload any new sketch to Bluno on my PC. DFR0267 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

394 Views

0 Replies
I do not understand your schematic. DFR0009 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

416 Views

0 Replies
I uploaded the first sketch to arduino, the 4 relays should be turned on and off every second, but nothing happened. What did I miss? DFR0144 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

411 Views

0 Replies
I was able to scan the sensor address using the I2C scanner, but unable to initialise the sensor after uploading the sample code. SEN0359 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

383 Views

0 Replies
If a problem persists, what can be tried? ROB0102 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

341 Views

0 Replies
If batteries are installed but the motors are not moving, what should be done? ROB0102 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

379 Views

0 Replies
If the Cherokey is only plugged in with USB power through the microcontroller, why the motors will not work? ROB0102 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

400 Views

0 Replies
If you are having issues after installing the driver and using HDMI or other video output DFR0275 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

418 Views

0 Replies
If you have connected a sensor to the Arduino but are unable to use it SEN0001 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

401 Views

0 Replies
Is chip heating normal? SEN0677 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

365 Views

0 Replies
Is it convenient for lever-type terminal blocks to connect flexible wires? TEL0185 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

394 Views

0 Replies
Is it normal for the screen to blink during refresh? DFR0531 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

455 Views

0 Replies
Is it normal that the screen flashes for a long time when refreshing? DFR0591 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

439 Views

0 Replies
Is Linux or macOS supported? DFR1247 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

368 Views

0 Replies
Is the Wifi shield compatible with DLink 802.11n routers? TEL0019 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

468 Views

0 Replies
no desktop display or yellow exclamation on graphics card in device manager when computer is turned on DFR1169 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

651 Views

0 Replies
No ESP32-C5 development board in Arduino IDE DFR1222 DFR1236 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

443 Views

0 Replies
No printout on the serial port DFR1222 DFR1236 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

440 Views

0 Replies
Possible reasons for no output or output errors? SEN0604 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

380 Views

0 Replies
Serial port keeps printing reset information DFR1221 FAQ Aftersales FAQ Yx 2024-07-12 15:04:05

Topics

Trending