productphoto

FireBeetle ESP32 IoT Microcontroller with 250+ ESP32 Tutorials (Supports Wi-Fi & Bluetooth)

SKU:DFR0478 Brand:DFRobot Reward Points: 89
Quantity Based Price
  • QTYDISCOUNT
  • 3-4$8.60
  • 5-9$8.50
  • 10+$8.30
* Model:
Quantity:

Introduction

DFRobot FireBeetle series is the low-power consumption micro-controller intentionally designed for Internet of Things (IoT) projects. FireBeetle Board - ESP32 integrates a Dual-Core ESP-WROOM-32 module, which supports MCU and Wi-Fi &Bluetooth dual-mode communication. The main controller supports two power supply methods: USB and 3.7V external lithium battery. And both USB and external DC can charge the Lipo battery directly.

Name WiDo
Beetle ESP32
FireBeetle ESP8266
FireBeetle ESP32
SKU DFR0321
DFR0575 DFR0489
DFR0478
Microcontroller
CC3000
ESP32 ESP8266
ESP32
Power supply interface
USB or DC2.1
USB USB or 3.7V Lipo
USB or 3.7V Lipo
USB Powered or External (V)
7 - 12
3.5 - 6.5
3.3 - 5.0
3.3 - 5.0
Operating Voltage (V)
5V
3.3V 3.3V
3.3V
CPU Frequency (MHz)
16
240
160
240
Flash(M)
-
16
16
16
SRAM(KB)
- 520 50 520
Analog pins
6 4 1 5
Digital pins
14 4 10 10
Wi-Fi protocol
802.11b/g 802.11b/g/n 802.11b/g/n 802.11b/g/n
Frequency range
2.4 GHz 2.4 - 2.5 GHz 2.4 - 2.5 GHz 2.4 - 2.5 GHz
UART
1 1 1 1
I2C
1
1
1
1
I2S
1
1 1 1
SPI 1
1
1
1
Compatible IDE
Arduino IDE 1.6+
Arduino IDE 1.6+
Arduino IDE 1.6+
Arduino IDE 1.6+
Download Mode
Micro USB
Micro USB
Micro USB
Micro USB
Arduino UNO Compatible

×
×
×
Lipo Charger Support
×



Dimension(mm)
75*54
35*34
58*29
58*29
 Weight (g)
30 g 12 g 24 g 24 g
Key Features

On board 2.4G PCB Antenna

and SD card slot.

 Integrate a Dual-Core ESP-WROOM-32 module. Support MCU and Wi-Fi &Bluetooth dual-mode communication. V shaped gilded I/O interface, can be sewn on clothes directly.
Arduino、RTOS、microPython Programming Support. Built-in 32-bit Tensilica L106 MCU and 10-bit ADC.
Mobile BLE APP Connection Support. 

You may also check Bluetooth microcontrollor selection guide for more information.


FireBeetle ESP32 IOT Microcontroller Size Comparsion

firebeetle esp32 has made a special hardware design for Arduino IDE. You can make a download without switching boot-mode manually. It supports Arduino, IDF (linux), micropython etc. Moreover, FireBeetle made a pin mapping for Arduino IDE. It can be configured with Dx transport, compatible with arduino UNO and reduce the entry barrier.

The small size and high performance makes FireBeetle become idea solution for IOT low power consumption projects.

FireBeetle ESP32 IOT Microcontroller Details

Version Upgrade:

1. Add a new anti-reverse connection silk-screen.  

2. Change the Lipo battery connecter direction.

Compatible with products in the DFRobot FireBeetle serials


Features

  • Quick Response(the top frequency is 400KHz)
  • Cost-effective
  • Small size, convenient to install

Specification

  • Working voltage: 3.3V
  • Input voltage: 3.3V~5V
  • Support maximum discharge current: 600mA
  • Support maximum charge current: 500mA
  • Support USB charging.
  • Processer: Tensilica LX6 dual core processer (One for high speed connection; one for independent programing).
  • Frequency: 240MHz
  • SRAM:520KB
  • Flash:16MB
  • Wi-Fi standard:FCC/CE/TELEC/KCC
  • Wi-Fi protocol: 802.11 b/g/n/d/e/I/k/r (802.11n, high speed can reach to 150 Mbps), converge A-MPDU and A-MSDU, supporting 0.4us protecting interval.
  • Frequency range: 2.4~2.5 GHz
  • Bluetooth protocol: Comply with BR/EDR/BLE standard of Bluetooth v4.2.
  • Bluetooth audio: the current under low power consumption of CVSD and SBC is 10μA
  • Working current: 80mA in average
  • Frequency range: 2.4~2.5GHz
  • Support one-key downloading.
  • Support micropython.
  • On-chip clock: 40MHz crystal and 32.768 KHz crystal.
  • Digital I/O: 10 (default setting of arduino)
  • Simulative input: 5(default setting of arduino)
  • SPI: 1 (default setting of arduino)
  • I2C: 1 (default setting of arduino)
  • I2S: 1 (default setting of arduino)
  • LED_BUILTIN:D9
  • Interface: FireBeetle series compatible
  • Working temperature: -40℃~+85℃
  • Dimension: 29 × 58(mm)/1.142 x 2.283(inches)
  • The dimension of mounting hole: inner diameter 3.1mm; outside diameter 6mm.

Projects

Project 1. ESP32 Deep Sleep Tutorial for Low Power Projects

Introduction: Learn how to put the ESP32 chip into the Deep Sleep mode in order to conserve power and make our projects battery friendly.



Project 2. How to Use Bluetooth(BLE) With ESP32

Introduction: Learn how to use the ESP32 board to send temperature reading over Bluetooth Low Energy.



Project 3. ESP32, more powerful than any other Arduino



Project 4. Controlling Air Conditioner temperature automatically with ESP32

Introduction: This tutorial teaches you how to fetch the real-time weather data with a microcontroller and how to mimic the air conditioner remote control that uses IR (Infrared) technology to control the AC using an IR transmitter.




Project 5. Solar Weather Station Using ESP32

Introduction: This project aims at building a Weather Station and send the data to your channel. The system will be placed on the balcony and will retrieve temperature, humidity and air pressure.

Documents

Shipping List

  • FireBeetle ESP32 IOT Microcontroller x1
  • 18 pin-2.54mm x2
  • 18 female header-2.54mm x2

TUTORIAL

REVIEW

[[r.text]]
reviewImage
[[r.author]]
[[r.date_added]]

FAQ

FireBeetle ESP32 IoT Microcontroller with 250+ ESP32 Tutorials (Supports Wi-Fi & Bluetooth)

$8.90
In Stock
QTY DISCOUNT
  • 3-4$8.60
  • 5-9$8.50
  • 10+$8.30
Quantity:

BACK TO TOP