Topics

111 Views

0 Replies
Which of the ICs on the Raspberry Pi 5 need the 4 thermal silicone pads that come with this heatsink?update: if you look at the bottom of the heatsink, you can see where the pads s... FAQ FIT0979 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

127 Views

0 Replies
We are trying to use this sensor to detect water in plastic tubes, but it is unable to detect small quantities (~300 microLitres). Is there anyway we can increase its sensitivity? FAQ SEN0508 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

576 Views

1 Replies
Can we use this item as is. Connect 5v, ground andWhen there motion detect the 'out' go hight 5vIf so I need this asap FAQ SEN0609 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

116 Views

0 Replies
What is the difference between RPLiDAR C1 and RPLIDAR A1M8-R6? FAQ DFR1138 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

107 Views

0 Replies
Hi. could you confirm if this item holds CE or UKCA Rating? Many Thanks. FAQ DFR0884 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

751 Views

1 Replies
Hello, I would like to know if the accuracy of the NO2 value at the output of the DFRduino UNO R3 (assembled with MICS-2714/SKU:SEN0441) is also 0.05ppm (like that of MICS-2714), o... FAQ SEN0441 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

419 Views

1 Replies
Is there a 3D model of this case which you could share? FAQ FIT0949 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

587 Views

3 Replies
Is it possible to control the Intelligent Rain Detection Module with this kit? FAQ EDU0170 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

121 Views

0 Replies
Load Capacity: 5kg.Is it for one wheel? FAQ FIT0780 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

474 Views

1 Replies
Can this display be used on raspberry pi 4 model B FAQ FIT0955 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

173 Views

0 Replies
Is there a warranty for this? FAQ SEN0519 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

113 Views

0 Replies
https://github.com/Larry70455/DFRobot_GP8302/blob/main/DFRobot_GP8302.hRefactored code so that it doesn't clog up I2C and allows other devices on I2C without interfering with each ... FAQ DFR0972 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

195 Views

0 Replies
Can i use this Converter for MEGA2560's serial pins 14-19 or it will only works for pins 0 and 1? Also can I connect more use more than one converter in my project (i need two RS23... DFR0077 Arduino SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

675 Views

1 Replies
Can this sensor count people in a room? FAQ SEN0623 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:23

111 Views

2 Replies
I'm using a dev board with an ESP32-PICO-MINI-02. The I2C pins on this dev board are SDA=22 and SCL=20Even when specifying these I2C ports in line 48 of DFRobot_GR10_30.cpp: _pW... FAQ SEN0543 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:22

124 Views

3 Replies
How are these I2C lines protected from ESD, EMI, etc? FAQ SEN0562 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:22

51 Views

0 Replies
does the motor gets over heated and failsafe if stalled @2Amp for more than 30mins, used for gripping objects at a constant torque for 20mins FAQ SER0062 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:22

58 Views

7 Replies
Have you considered offering the Signal Adapter PCB as a stand alone product? It could be very useful for reading other sensors that rely on counting switch closures / pulses - ... FAQ SEN0575 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:22

212 Views

2 Replies
not sure why you guys put BLE4.0 in 2023 ? That's really it's only drawback. H FAQ DFR0706-EN Aftersales FAQ JaneYu 2026-02-14 08:57:22

479 Views

1 Replies
Does it support an OV5640 camera? (5 million pixels) FAQ DFR0618 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:22

Topics

Trending