productphoto

Gravity: Electrochemical Oxygen / O2 Sensor (0-100%Vol, I2C)

SKU:SEN0496 Brand:DFRobot Reward Points: 959
$95.90
In Stock
Topic: Arduino Gravity
Quantity Based Price
  • QTYDISCOUNT
  • 3-4$93.00
  • 5-9$91.00
  • 10+$88.00
* Model:
Quantity:
Expected Restock Date: [[restockDate]]

Introduction

This full-scale oxygen / O2 sensor employs the original AO2 CiTiceL® oxygen sensor probe and features a measurement range of 0-100%Vol and I2C digital output, which can be adapted to application scenarios including oxygen / O2 generators, automobile exhaust, and air-fuel ratio detection.

The DFRobot oxygen / O2 sensor has a built-in calibration algorithm on the signal board that can quickly perform single-point or double-point calibration so as to accurately measure the oxygen / O2 concentration in the environment. Based on the principle of electrochemistry, the sensor probe comes with strong anti-interference ability, high stability and sensitivity, and up to two years of service life. It is compatible with mainstream controllers such as Arduino, ESP32, Raspberry Pi, etc. Besides, the sensor is designed with an easy-to-use Gravity interface, and with our sample codes, you can quickly build an oxygen / O2 detector.

Caution: Exposure to high concentrations of solvent vapors is avoided, both during storage, fitting into instruments, and operation.

Gravity: Electrochemical Oxygen Sensor (0-100%Vol) - I2C


I2C Oxygen / O2 Sensor Selection Guide

Product Gravity:Electrochemical Oxygen / O2 Sensor (0-25%Vol) - I2C

Gravity:Electrochemical Oxygen / O2 Sensor (Calibrated) - I2C & UART

Gravity: Electrochemical Oxygen / O2 Sensor  (0-100%Vol) - I2C
SKU SEN0322 SEN0465 SEN0496

Detection 

Range

0~25%Vol 0~25%Vol 0~100%Vol

Calibration 

Method

Manual calibration Factory calibration Manual calibration
Output Signal I2C I2C、UART、Analog I2C

Working 

Principle

Electrochemical Electrochemical Electrochemical
Stability <2%/Month <2%/Month <10%/Year
Response Time ≤15S ≤15S  0.1%~20.9%<40S  20.9%~100%<5S

Operating 

Pressure Range

101kPa±10% 101kPa±10% 0.5 - 2.0 Bar

Temperature 

Compensation

× ×


Features

  • Strong anti-interference ability
  • High stability and sensitivity
  • Applications

  • Oxygen / O2 generators
  • Automobile exhaust
  • Air-fuel ratio detection
  • Specification

  • Physical Quantity Detected: Oxygen / O2 concentration
  • Measuring Range: 0~100%
  • Working Voltage: 3.3~5.5V DC
  • Output Signal: I2C
  • Working Pressure Range: 0.5~2.0Bar
  • Operating Temperature Range: -20°C ~ +50°C
  • Operating Humidity Range: 0-99% RH (non-condensing)
  • Response Time: <5S
  • Lifespan: >2 years (in air)
  • Size: 32mm*27mm/1.26*1.06 inch
  • Mounting Hole Size: inner diameter 3.1mm(0.12 inch)/outer diameter 6mm(0.24 inch)
  • Compatible with Arduino, ESP32, Raspberry Pi
  • Documents

    Shipping List

  • Gravity: AO2 Oxygen / O2 Sensor Signal Adapter Board x1
  • AO2 Oxygen / O2 Sensor Probe x1
  • Gravity-4Pin Cable x1
  • Molex 2510 - PH2.0 cable (20CM)  x1
  • TUTORIAL

    • How Electrochemical Gas Sensors Work and Key Parameters for Gas Detection
      2023-08-10 14:17:46
    • DFRobot Gas Sensor Selection Guide
      2022-06-26 02:19:45

    REVIEW

    reviewImage
    [[r.author]]
    [[r.date_added]]

    FAQ

    Gravity: Electrochemical Oxygen / O2 Sensor (0-100%Vol, I2C)

    $95.90
    In Stock
    QTY DISCOUNT
    • 3-4$93.00
    • 5-9$91.00
    • 10+$88.00
    Quantity:

    BACK TO TOP