0
logo
logo
productphoto

Arduino Uno Rev 3

SKU:DFR0181 Brand:Arduino Reward Points: 15
$22.00 Out Of Stock
Price in Reward Points:2890
Quantity Based Price
  • QTYDISCOUNT
  • 2-4$21.50
  • 5-9$21.00
  • 10+$20.00
* Model:
Quantity:

You have choosen:[[togetherChouseinfo.num]]

Total amount: [[currency]][[togetherChouseinfo.price]] [[togetherChouseinfo.price]][[currency]]

Introduction

This is the new Arduino Uno Rev 3. In addition to all the features of the previous board, the Arduino Uno Rev 3 now uses an ATmega16U2 instead of the 8U2 found on the Uno (or the FTDI found on previous generations). This allows for faster transfer rates and more memory. No drivers needed for Linux or Mac (inf file for Windows is needed and included in the Arduino IDE), and the ability to have the Uno show up as a keyboard, mouse, joystick, etc.
 
The Arduino Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is not connected and is reserved for future purposes. The Arduino Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.
 
Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP). The open-source IDE can be downloaded for free (currently for Mac OS X, Windows, and Linux).
 
Warnings: The Arduino Uno R3 requires the Arduino 1.0 drivers folder in order to install properly on some computers. We have tested and confirmed that the R3 can be programmed in older versions of the IDE. However, the first time using the R3 on a new computer, you will need to have Arduino 1.0 installed on that machine.  If you are interested in reading more about the changes to the IDE, check out the official Arduino 1.0 Release notes!



Arduino UNO Project:
Materials:
SD card - 2GB ~ 32GB formatted with FAT or FAT32
MP3 / WAV - audio files

Materials:

This project makes a Heart Beat Detection and Monitoring System using Arduino that will detect the heart beat using the Pulse Sensor and will show the readings in BPM (Beats Per Minute). 
Hardware needs:

Arduino UNO R3 Application 4: 2.8" TFT Touch Shield for Arduino Project

Wanna play with some graphic or make a touch interface? Use this DFRobot's Touch Shield for Arduino UNO!
Tamaguino was one of my first Arduino projects and my first game developed to run on a microcontroller.


Arduino UNO R3 Application 6: Get Started with 0.5" OLED Display

Do you need a really, really small OLED display Search no more, and check out this tutorial.
Hardware components:
SPI/I2C Monochrome 60x32 0.5" OLED Display for Arduino
Arduino UNO & Genuino UNO
DFRobot Arduino Jumper Cables (M/M) (65 Pack)    

Arduino UNO R3 Application 7: Get Started with Capacitive Touch Kit Tutorial

Connector board and rainbow cable. The kit only allow the use of one pad at a time connected to the Arduino. To start you will need the touch kit library, available here.

Hardware components:
DFRobot Capacitive Touch Kit For Arduino
Arduino UNO & Genuino UNO    

Specification

  • ATmega328 microcontroller
  • Input voltage - 7-12V
  • 14 Digital I/O Pins (6 PWM outputs)
  • 6 Analog Inputs
  • 32k Flash Memory
  • 16Mhz Clock Speed

Documents

Shipping List

  • Arduino Uno   R3 x1

TUTORIAL

  • MultiTasking Robot with Devastator Platform
    2015-07-28 00:00:00
  • Decoding and Sending 433MHz RF Codes with Arduino and RC-Switch
    2015-10-08 00:00:00
  • Lattepanda Project: C# Arduino GUI to control the LED
    2018-04-03 09:33:13

REVIEW

Arduino Uno Rev 3

$22.00
Out Of Stock
QTY DISCOUNT
  • 2-4$21.50
  • 5-9$21.00
  • 10+$20.00
Quantity:

BACK TO TOP