Topics

79 Views

4 Replies
The product has been working very well since a few months but the metal clips at the borders are rusting badly now, and this during summer months... FAQ FIT0573 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

47 Views

0 Replies
I have one of these that I've recently tried to hook up but I don't seem to be getting good values off it.Running on 3.3v on a Firebeetle ESP-32E I consistently get readings around... FAQ DFR0543 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

57 Views

2 Replies
To complete Chapter 11 in the Get Started Tutorial you need an IR remote controller - this is not included in the kit and is not available for purchase from DFRobot. You are unable... FAQ MBT0021-EN-2 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

403 Views

1 Replies
Hey, anyone know who manufactures the actual screens? I'd like to know which chemicals are used for the liquid crystals for OH&S. FAQ DFR0664 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

116 Views

3 Replies
I was trying to connect 8 Qty SHT 85 humidity/temp I2C sensor to the multiplexer and then connect the multiplexer to NI 8451. However, I could never get more than 2 ports to work i... FAQ DFR0576 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

114 Views

0 Replies
Does this work with the PiTray mini for Raspberry Pi Compute Module 4? There don't seem to be any cases specific to this, although it appears to be able to work with cases that ha... FAQ FIT0650 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

55 Views

0 Replies
will this work with 3.3v supplied power from particle microcontroller? FAQ SEN0214 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

131 Views

39 Replies
I put the fan in front of the sensor and it detects people continuously. Is there a way to remove this motion? FAQ SEN0395 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

903 Views

1 Replies
Can i connect this LCD to the Arduino Expansion Shield V7.1? I cant find the RESET pin in this expansion shield, and this lcd need to connect to the RESET pin FAQ FIT0328 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

110 Views

0 Replies
Hi, may I know the specs of the cable? What is the AWG size? FAQ FIT0648 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

103 Views

0 Replies
Could the drill holes (or a drawing of) be added to the specification for this please? FAQ FIT0266 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

110 Views

2 Replies
Wow. You included a diagram. I cannot wait to put mine together tonight with the case. My CM4 Routerboard has just been sitting there dangling for 3 months.Thank you DFRobot. FAQ FIT0788 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

66 Views

2 Replies
Will the Gravity: Active Isolated RS485 to UART Signal adapter plug directly in to thee SEN0311(A02yyuw) waterproof Ultrasonic sensor? FAQ DFR0845 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

62 Views

3 Replies
Is there an easy way to send the data of 1 fingerprint to another arduino with fingerprint? To store the same fingerprints in 2 different arduinos. I wanted to communicate through ... FAQ SEN0359 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

42 Views

2 Replies
In Dimension of DS3231M module (DFR0641), there is no pin header location information.Can I get the STEP 3D File or AutoCAD File for this [email protected] you in adva... FAQ DFR0641 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

71 Views

0 Replies
Can you suggest a servo controller that would work with this and a Raspberry Pi? FAQ SER0032 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:18

117 Views

3 Replies
Can it only be controlled with PPM or will a PWM signal from an RC receiver work too? Also, is it suitable for 6s lipos which have a fully charged voltage slightly over 24V? FAQ DRI0047 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:17

66 Views

13 Replies
What material is the sensor coating made of? FAQ SEN0308 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:17

439 Views

1 Replies
Hello, I would like to know more technical information about omnidirectional mecanum wheels.axial and radial stress.there are wheels with better weight capacity for industry. FAQ FIT0662 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:17

61 Views

2 Replies
Is there a code written for this bionic arm someone can share? Thanks FAQ ROB0143 SEO FAQ Aftersales FAQ JaneYu 2026-02-14 08:57:17

Topics

Trending