Topics

32 Views

0 Replies
What should be done if the data is abnormal? SEN0676 FAQ niu.yixuan 2024-07-12 15:04:05

32 Views

0 Replies
Why does the Leonardo UART port get locked by the sketch and lose its COM Port in Device Manager? DFR0282 FAQ niu.yixuan 2024-07-12 15:04:05

27 Views

0 Replies
Why are some characters not displaying correctly? DFR0531 FAQ niu.yixuan 2024-07-12 15:04:05

29 Views

0 Replies
Why are batteries not included? DFR1247 FAQ niu.yixuan 2024-07-12 15:04:05

24 Views

0 Replies
What are the possible reasons for no output or output errors? SEN0642 SEN0644 SEN0641 FAQ niu.yixuan 2024-07-12 15:04:05

28 Views

0 Replies
Is chip heating normal? SEN0677 FAQ niu.yixuan 2024-07-12 15:04:05

28 Views

0 Replies
What if a problem persists? ROB0117 FAQ niu.yixuan 2024-07-12 15:04:05

42 Views

0 Replies
How to drive the module via USB port (AT command) using Leonardo after changing Serial to Serial1? TEL0051 FAQ niu.yixuan 2024-07-12 15:04:05

35 Views

0 Replies
Why can't the e-ink screen be driven on some newer Raspberry Pi systems or the Raspberry Pi zero 2 w? DFR0591 FAQ niu.yixuan 2024-07-12 15:04:05

38 Views

0 Replies
No ESP32-C5 development board in Arduino IDE DFR1222 DFR1236 FAQ niu.yixuan 2024-07-12 15:04:05

29 Views

0 Replies
Cannot find the COM port DFR1221 FAQ niu.yixuan 2024-07-12 15:04:05

40 Views

0 Replies
Would this microcontroller connect to 5V SPI devices via ICSP, like Pixy, given the 5V ICSP header and 5V sensor incompatibility note? DFR0329 FAQ niu.yixuan 2024-07-12 15:04:05

28 Views

0 Replies
Is it normal that the screen flashes for a long time when refreshing? DFR0591 FAQ niu.yixuan 2024-07-12 15:04:05

25 Views

0 Replies
What power supply is needed for the strip? FIT0352 FAQ niu.yixuan 2024-07-12 15:04:05

37 Views

0 Replies
Why do some AT commands return "Error: (16)" when sent to the device? TEL0026 FAQ niu.yixuan 2024-07-12 15:04:05

30 Views

0 Replies
Why isn't my yellow USB-TTL adapter recognized properly after installing the latest Silicon Labs driver on Windows? TEL0005 FAQ niu.yixuan 2024-07-12 15:04:05

26 Views

0 Replies
What should I do if the Cherokey's motors are not moving when only plugged in with USB power through the microcontroller? ROB0117 FAQ niu.yixuan 2024-07-12 15:04:05

36 Views

0 Replies
Why does the application show "serial timeout" when trying to upload new firmware to Bluno? DFR0267 FAQ niu.yixuan 2024-07-12 15:04:05

30 Views

0 Replies
Why does the calibration value not show 2000 when using getCalibration() after setting it with setCalibration(2000)? KIT0176 FAQ niu.yixuan 2024-07-12 15:04:05

119 Views

0 Replies
Why do both Stat and Net LED turn off and why does it display "normal power off" on rare connections? TEL0051 FAQ niu.yixuan 2024-07-12 15:04:05

Topics

Trending