Easy IoT is a simplest IoT Solution presented by DFRobot
By frankdfrayoud34
Have you ever imagine something like you are in a dark room wearing a hoodie and coding?

I used to have a strong wish to be a hacker in my early years.B ut I never found a way to be one of those legends.

So I chose to dress like a hacker. That's why I want to make myself a coolest hoodie.

I was inspired by the project The Sound Reactive LED Mask. [url = https://www.kickstarter.com/projects/ou ... =discovery#]LINK HERE[/url]

# Step 1: Components Lists

0. EL(Electro Luminescent)

1. DFRduino UNO R3

2. Gravity: GPIO Shield for Arduino

3. Gravity: Digital 5A Relay Module

4. Mini Push Button Switch (5 pcs)

5. some wire

#Step 2: Test the Circuit

1. I tried to set a button on the switch (parallel)

2. Once I found it works I used Arduino digit pin and GND instead

3. THEN I can use code to control the EL



I did some cutting work to shape the EL

All these steps would just cost u about 2 hours!!!